Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dikran B - September 10, 2021
Verified Purchase
Too expensive
I t cost 110 dollars. Next time I will buy a gas operated range. I have no complaints about the service and prompt delivery. I learned how to install it online and installed it in ten minutes. About a year ago I changed the bigger dual mode burner which cost 40% less than the current small burner. Apparently those burners last about five years or so depending on the amount of use.
★★★★★
★★★★★
Armando D - December 9, 2020
Verified Purchase
Perfect replacement
The replacement part worked perfectly. Taking pictures of the wiring before removing the old part helps with correctly connecting the new part.
★★★★★
★★★★★
Paul G - October 5, 2020
Verified Purchase
Most people can do this with ease
Part came quickly in 2 days, took 15 minutes to study position of pieces holding it in and change. Works good
★★★★★
★★★★★
Douglas B - February 28, 2020
Verified Purchase
Great service
The part came in a timely manner and was a relatively easy repair. Worth it to have GE part for GE glass cooking surface.
★★★★★
★★★★★
Michael W - June 26, 2018
Verified Purchase
Haven't recieved part yet
Don't know much haven't got my part yet Steve element
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stovetop radiant burner went out
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
Frank from Marietta, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cesar
December 9, 2017
Hello, I have a question, will these 2 elements work on my stove?
For model number JBS60RF1SS
Hello Cesar,
Thanks for your question. Yes, this part is compatible with your model.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Zully
July 2, 2019
I need to replace the left rear burner on this model. Do you have this part?
For model number JP346
Hello Zully, thank you for writing. The model number you provided is partial with multiple variations using some different parts. We will need the rest of the model number to look into this. There should be five more characters after what you provided. We look forward to hearing back from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cui
November 23, 2021
How could I find the right elements radiant burners for this model
For model number Jp3030dj1bb
Hello Cui, Thank you for your inquiry. We have researched the model number you have provided and show the right front element is part# PS2339867, and the right rear is PS2370248. We hope this helps.
Replacing right rear burner original burner is 1200watts, 240volts. Is this the part i need?
For model number js968 or jd968
Hello Bill, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number off the Appliance and not the manual. Both of js968 or jd968 are incomplete. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mike
December 14, 2023
GE Drop in cook top. The right rear burner comes on full heat and won't run at any lower settings.
For model number CEP90301N1BB
Hello Mike, thank you for contacting us. We would recommend checking the display board, part number PS12749203, to fix the issue. We hope this helps!
I need the right rear element radiant 5.5 inch burner for a GE adora stove
For model number JB745SF3SS
Hi German, thank you for your question. This part you have questioned on is actually the right rear element. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Cui
November 23, 2021
How could I find a 9” element radiant burner?
For model number JP3030DJ1BB
Hello Cui, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2339867. When they measure the 8", they are not including the frame to the element. This element will replace the large element on your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
need GE WB330T10130 element. Is a WB30T10145 a good fit?
For model number JB645DK4AV
Hello Duncan, Thank you for your inquiry. We show that this is the smaller element for the model number you have provided. If you are looking for the larger element, the part number is PS11729126. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
one of the small burners doesn't work what wrong with it?
For model number JB650SF1SS
Hello Lucila, Thank you for your inquiry. It could be an issue with the element, the switch or the connecting wires. Checking the cooktop wiring harness for any visible damage or loose connections, and you can test the element and switch with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!