This part includes the gas pressure regulator and the oven safety valve.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric.
Part# WB19K10043 replaces these:
AP4484217, 1556011, WB19K10017
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
December 17, 2019
Hello what do recommend could be the reason my range oven sometimes doesn't come on. It also can take a very long time for the temperature to come up
For model number Pgb908demicc
Hello Lawrence and thanks for writing.
It certainly sounds like a faulty oven igniter PS231280 and/or temperature sensor PS953423 check for signs of damage and replace it if needed. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.
Have an issue with delayed ignition; are there any other part besides the dual combination assembly needed to resolve this problem?
For model number JGB605SET1SS
Hello Joseph, thank you for writing. You may want to consider either the Flat Style Oven Igniter Kit part PS231280, the Burner with Igniter part PS952996, or the Igniter Glowbar part PS11725182 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Ronald
October 18, 2019
This gas range often does not heat properly. I set oven to 400 and wait for it to preheat. It will get to say 388 and just stay there. When i clear it and reset to 400. It will say the temp is only 275. Then it will continue to heat till 400. What part do i need??
For model number JGB820DEP2BB
Good Day Ronald. Thank you for your question in regards to your unit (Model Number JGB820DEP2BB). Based on our research you may need to replace the Temperature Sensor (PartSelect Number PS2374070). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Jeremy Mcbride
November 23, 2019
Sometimes you can only light one burner and if you try to light a second one the first one the Flame will go down and almost go out. Sometimes they work fine. Is that possibly a regulator issue? The Flame that comes on is even and blue, just very low. Thank you for your time.
For model number JGBP88BEK3BB
Hi Jermey, hard to say seems like a gas supply issues or you may need to replace the igniters. Thank you for your question and good luck with your repair!