We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JP
March 6, 2018
Hi this would be my first time repairing a dryer...dryer error keeps reading “door open” assuming this may be the door switch. Error code E66 heater...unsure which part to buy except for the switch. If you can provide me the correct part/number for my model dryer
For model number FASG7073LA0
Hi JP,
Thank you for your question. Yes, you will probably want to check your door switch to make sure that it is working correctly. The E66 error code does indicate that there is a problem with the circuit. If your door switch is fine, then you will probably want to test both of your thermal fuses (or limiters as we have listed them). You can test all three parts with a multi meter. I hope that helps. Good luck with your repair.
Door open comes up on display. Switch seems OK. How can you tell if it's bad.
For model number EIED55IRR0
Hi Garry, thank you for reaching out. To check the door switch, part number PS2367765, you may follow the instructions below:
1- You may use either a digital or analog multimeter to test the switch for continuity.
2- If you are using an analog multimeter, rotate the selection dial to the lowest setting for ohms of resistance and calibrate the meter by pinching the leads together while adjusting the needle to read zero.
3- When using a digital model, again rotate the dial to the lowest setting for ohms of resistance.
4- Connect the black meter lead to one of the terminals of the switch and the red lead to the other terminal.
5- Now actuate the switch.
6- If the meter shows zero ohms of resistance, the switch has continuity.
7- If the needle does not move or the display does not change significantly, the switch has no continuity and you may need to replace it.
We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
December 22, 2019
Front door will not stay closed, is this the door switch?
For model number EIED55HMB0
Hi William,
Thank you for your question. If the door will not close, the door latch, part number PS8691863, will fix the issue the majority of the time. We hope this helps. Thank you and have a great day!