Part Location Diagram of 316462842 Frigidaire CONTROLLER
See part F20 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

CONTROLLER 316462842

 Fits your CGCS389FS3 Range!

Rated by 1 customer 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 354.98
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your CGCS389FS3 Range!
PartSelect Number PS2339267
Manufacturer Part Number 316462842
Manufactured by Frigidaire
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Frigidaire.
Part# 316462842 replaces these:
AP4358788, 316462828
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Oven Overheating with F10 Error Code
My Frigidaire dual fuel oven/range is a slide-in model.

The first thing to do is look at the control board in your existing panel. To do this, pull off the control knobs and unscrew the plastic piece at the bottom. The whole front panel should lift up and gently flip it back (onto a towel) so that you can see the control panel and all the hook-ups you need. I had ordered a different control panel (from somewhere else) and when I compared the two panels, the new one did not have enough connections and would not connect correctly (I hadn't looked at the control panel I already had). lI saw the control panel from Partselect and the photo showed all the right connections.

TAKE A PHOTO OF WHERE ALL THE CONNECTIONS ARE NOW!!! Very important!!! Once I received the new panel, it was time to pull off the old connections from the old panel and connect to the new panel. Some of the "many-pronged-connectors" were easy to detach by just squeezing the side tabs which release the connection. Two of the metal single tab connections needed a pointy object (like an awl) to push a small metal tab inward in order for the metal to release...... not that easy! And then there were the two front "ribbon connectors", which didn't seem to have any type of release mechanism at all...... until I looked at the new control panel and saw that the top portion of the black box connector "lifted up" to release the ribbon connection from below.

Once all the connections were accounted for, I installed the front panel again and turned on the breaker. I have a working oven again!!!

Thanks to Partselect for having the correct part for a discontinued range model!!!
  • Terry from UNDERWOOD, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2339267
Manufacturer Part Number: 316462842
Brand
Model Number
Description
Frigidaire
CGCS389FB3
Range - Slide-in, Electric, Gas
Frigidaire
CGCS389FS3
Range - Slide-in, Electric, Gas
Frigidaire
CPCS389EC7
Range - Slide-in, Electric, Gas
Frigidaire
CPCS389EC9
Range
Frigidaire
GLCS389FBC
Range - Slide-in, Electric, Gas
Frigidaire
GLCS389FBD
Range
Frigidaire
GLCS389FQC
Range - Slide-in, Electric, Gas
Frigidaire
GLCS389FSC
Range - Slide-in, Electric, Gas
Frigidaire
GLCS389FSD
Range
Frigidaire
PLCS389ECG
Range - Slide-in, Electric, Gas
Frigidaire
PLCS389ECI
Range - DUAL FUEL RANGE
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service