Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
gas leak at the oven oriface from the gas valve
layed the range on its side and removed the gas valve installed the new valve leak checked and tested works like new. Great service and parts availability, shipping was fast.
Pat from Riverside, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
9 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 31, 2022
Images 1 and 2 show a different valve than image 3. Can you confirm which image of the valve is correct?
Hello Mike, Thank you for your inquiry. We have researched the part number you have provided and all 3 images are correct, image 1 is the bottom of the part, image 2 is the top, and image 3 is the side view of this part. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 9, 2020
Oven will not ignite and heat up. All other burners light (including broiler) as should
For model number RGB745BEA2WH
Hello Jim,
Thank you for your question. Our sources suggest replacing the oven igniter under part PS243425 for your model to fix the oven issues. We hope this helps.
Oven & broiler won't heat (display goes from on to off after 30 secs). Top burners work fine. Neither of the broiler or oven's hot surface ignitors glow.
For model number JGEP79AEV3AA
Hello Sandy, Thank you for your inquiry. We would recommend checking the following parts to fix your issue, the round style oven igniters, the oven sensor, and the dual oven safety valve. You may also want to check the wiring between the igniters and the control board for any visible damage. Good luck with your repair.
My oven seems to be cycling on off very often. It preheats good then the Flame goes out about 2 minutes later the glow bar starts up and the the Flame lights for about 1 minute then goes off again this keeps cycling like this . I checked the amperage going to the glow bar it was 2.9 3 amps . What would cause this?
For model number JGBP31WEC2WW
Hi Brian, Thank you for the question. I suggest testing for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. Hope this helps!