Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
NUT- HEATE 99002627
Fits your MDBH970AWS Dishwasher!
Rated by 1 customer
A Bit Difficult
1- 2 hours
Ratings submitted by customers like you who bought this part.
Fits your MDBH970AWS Dishwasher!
PartSelect Number PS2099975
Manufacturer Part Number 99002627
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air.
Part# 99002627 replaces these:
AP4113430, 1011949, 99002627
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced drying heater element due to lime scale build up.
1) Turn off water
2) Place receptacle to catch water before removing water fitting.
3) Disconnect water tube from valve.
4) Remove screws from mounting skirt connecting washer to counter/woodwork.
5) Slide washer out of slot paying attention to water tubing and electrical wiring. Ours was installed in such a manner to ... Read more allow removal of water tube with a little flexing. Wiring as a simple 110 plug so simply unplugged.
6) Tilt washer onto back.
7) Connections for element will be close to floor one washer on back.
8) Gently pull electrical connections from heater element to remove.
9) Remove nuts holding element in place.
10) Tilt washer upright. (May require second person here to help balance washer)
11) Open door and remove heater element. There are two clips holding to bottom that require a little dexterity to navigate.
12) At this point simply reverse the above instructions to reinstall. The insulation around the housing was a little tricky to navigate while sliding the washer back into place. It has a tendency to hang up on the woodwork.
2) Place receptacle to catch water before removing water fitting.
3) Disconnect water tube from valve.
4) Remove screws from mounting skirt connecting washer to counter/woodwork.
5) Slide washer out of slot paying attention to water tubing and electrical wiring. Ours was installed in such a manner to ... Read more allow removal of water tube with a little flexing. Wiring as a simple 110 plug so simply unplugged.
6) Tilt washer onto back.
7) Connections for element will be close to floor one washer on back.
8) Gently pull electrical connections from heater element to remove.
9) Remove nuts holding element in place.
10) Tilt washer upright. (May require second person here to help balance washer)
11) Open door and remove heater element. There are two clips holding to bottom that require a little dexterity to navigate.
12) At this point simply reverse the above instructions to reinstall. The insulation around the housing was a little tricky to navigate while sliding the washer back into place. It has a tendency to hang up on the woodwork.
Read less
Other Parts Used:
-
J from San Antonio, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
34 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2099975
Manufacturer Part Number: 99002627
Manufacturer Part Number: 99002627
Brand
Model Number
Description
Back to Top
NUT- HEATE
$
10.22
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.