We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JP
April 14, 2018
All the igniters keep clicking, does this part have anything to do with that?
For model number JDR8895AAS
Hello JP,
Thanks for your question. The spark module is the most common reason for this type of issue to occur. You may wish to test the spark module via a multimeter to see if it has electrical continuity, and replace it if it shows no continuity.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
August 20, 2019
My right front larger range burner clicks but does not ignite. All the other burners work properly.Help!
For model number MGR5875QDS
Hello Larry, Thank you for the question. I suggest replacing the Surface Igniter in that burner, PartSelect Number PS11744360. Hope this helps!
Hi, my friend has a Maytag gemini dual oven gas range. A number of years ago, water spilled while cooking and there was a small "bang." since then, none of the burners will ignite. Gas flows and they can be lit with a lighter. There no is no spark or click. I'm trying to help her fix it. I ordered a new spark module and put it to no effect the problem remains. Are there other possible fixes? I see some recommendations for the ignition wiring harness. Would this be the way? How would i replace that?
For model number mgr687adb/q/s/w
Hello Charles, thank you for your question. We would recommend replacing the ignition switch wiring harness and the spark module to fix this issue. The part numbers are PartSelect Number: PS2086548 and PartSelect Number PS2004066. I hope this helps!
Was this helpful?
Thank you for voting!
Mark
January 6, 2020
My front right and front left burners do not light by themselves. If i turn the middle or either of the rear burners ti "light" and then turn either of the front two burners to light then they also light. The front two burners have gas flow to the burners. If you remove the burner caps, all five lighters can be seen sparking, but the two front valves will not cause the sparks to happen only the middle and the rear two burners. Thoughts?
For model number JDR8895AAS
Hello Mark and thank you for writing.
It certainly sounds like it could be a faulty ignitor PS11746068 and/or ignitor switch with harness PS2004067, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
NONE of the surface ignitors click. This started after a pot boiled over. I replaced the ignitor module lower down on the back, but nothing changed.
For model number JDR8895AAS
Hello Bob, Thank you for the question. This could indicate the Igniter Switch with Harness was shorted out and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I have gas to stove burners. But i don't get any spark or clicking noise when the knob is turned to lite position. Same for all burners.Tom
For model number kfdd500ess
Hello Thomas, thank you for your question. The issue with the top burners would be one of two parts. The Spark Module PartSelect Number: PS2086548, or the ignition wire harness PartSelect Number: PS12578823. The more likely of the two is the spark module. You may wish to test the spark module via a multimeter to see if it has electrical continuity, and replace it if it shows no continuity. I hope this helps!
Was this helpful?
Thank you for voting!
Robert
February 13, 2019
Double oven all gas range model number kgrs505xss01, serial number d04978712 does not spark. Gas flows to each burner on surface and in ovens when selected. Control panel working normally. Appliance is not locked out. No spark happens. Not a click anywhere. Burners can be lit with match.
For model number KGRS505XSS01
Hi Robert,
Thank you for your question. If the stove is not igniting, you will need to check the wire harness with switches and the spark module. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Martha
June 17, 2019
The igniters on my gas top range spontaneously started clicking. They will light if i turn them on, but will not stop clicking. I have not cleaned them lately and they do not have anything foreign in the burners. The only way we could stop the clicking is to pull the breaker, leaving me with lighting the burners manually and no oven. Is it likely that the spark module is the answer to my problem? I don't want to buy this pricey part if it is not a fix.
For model number JDR8895AAB
Hello Martha, thank you for inquiring. You will want to check and possibly replace the Igniter Switch with Harness part PS2004067 for your model.
Was this helpful?
Thank you for voting!
Mike
July 31, 2017
The stove trips when we activate top burners (does not happen with lower stoves). Suspect bad spark module. Can you suggest if this is correct or other part needed. Mike
For model number KDRS505X
Hi Mike,
Thank you for the question, if all of the top burners are not igniting and tripping then the issue would be the Spark Module part number PS2086548.
Hope this helps!
Was this helpful?
Thank you for voting!
Gordon
November 16, 2017
Cleaning people got water under control knobs and appears to have shorted all pilotless ignition. None of the burners' pilotless ignition function, however all burners will light manually. What failed?
For model number JDR8895AAB
Hi Gordon,
Thank you for your inquiry. Where your surface burners are not igniting, I would check the spark module and the igniter switch with harness. I hope this helps. Thank you and have a great day!