We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Moses
November 19, 2018
What is the element size
For model number FEFL77AQE
Hello Moses, Thank you for the question. The PartSelect Number PS1993817 is a 9" element but not listed for the model number provided. The Dual Element for the model number provided is Part Number: PS977979. The front 8" Element is Part Number: PS436591. The rear small 6" elements on the left and right is Part Number: PS436590 and the center is Part Number: PS438587. Hope this helps, good luck with this repair!
Is this one compatible with part number 318198815? Thanks!
For model number CFEF322CS1
Hello Wenge, Thank you for the question. 318198815 is showing to be discontinued with no replacements. Checking the model number provided, the Large element (non dual) is Part #: PS1993817. Hope this helps!
Was this helpful?
Thank you for voting!
John
November 13, 2019
Where is the model # for the large ceramic burner..we have the burner out and can see it needs to be replaced..large burner
For model number FEC30S6ABC
Hello John, thank you for your question. The large front right burner is PartSelect Number PS2361362 and the large back left burner is PartSelect Number PS1993817. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Steve
November 19, 2017
I need installation instructions for removing the cooktop to replace the large element.
For model number FES367DSA
Hi Steve, Thank you for the question. To remove the main top you will need to pull the unit out. Remove the screws for the endcaps and under the control panel to remove the control panel. You will then need to remove the screws around the perimeter of the main top and lift the top up and remove the burners. Hope this helps