17626546-1-M-GE-WH08X37938-LID LOCK SERVICE KIT
Part Location Diagram of WH08X37938 GE LID LOCK SERVICE KIT
See part 395 in the diagram
( Grid squares measure 1x1 inch )
17626546-1-S-GE-WH08X37938-LID LOCK SERVICE KIT 17626546-2-S-GE-WH08X37938-LID LOCK SERVICE KIT Part Location Diagram of WH08X37938 GE LID LOCK SERVICE KIT
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

LID LOCK SERVICE KIT WH08X37938

★★★★★
★★★★★
85 Reviews

Rated by 19 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 85.35
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS17626546
Manufacturer Part Number WH08X37938
Manufactured by GE
Troubleshooting
This part works with the following products:
General Electric, Hotpoint, Camco, Kenmore.
Part# WH08X37938 replaces these:
WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X32697
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
85 Reviews
4.7
Filter By Rating:
  • 5 Stars
    75
  • 4 Stars
    4
  • 3 Stars
    3
  • 2 Stars
    0
  • 1 Star
    3
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chasity P - May 13, 2024
  Verified Purchase
Wasn’t easy until I looked it up on YouTube.
YouTube it. Save some time. The instructions will not help you. Found a 15 min video, bam. Done.
★★★★★
★★★★★
Kenneth K - November 8, 2023
  Verified Purchase
Easy fix, exact part needed
Everything you need after you get angry and force open the washer lid. :-)
★★★★★
★★★★★
Christopher L - August 23, 2023
  Verified Purchase
broken lid switch
excellent replacement part, slow getting here but that's a USPS problem, next time I order from you guys I will use some other carrier.
★★★★★
★★★★★
Edward V - June 16, 2023
  Verified Purchase
Works perfect
Arrived fast easy install
★★★★★
★★★★★
Jennifer L - May 24, 2023
  Verified Purchase
Correct Part
Correct part, worked perfectly, easy to replace.
★★★★★
★★★★★
Javier M - April 20, 2023
  Verified Purchase
Easy repair with the right parts
I like replacing the intire part
★★★★★
★★★★★
Karlene V - March 15, 2023
  Verified Purchase
perfect replacement part
The new part is a much better way to lock the lid and easy to install
★★★★★
★★★★★
Oscar C - February 3, 2023
  Verified Purchase
Easy repair
Part was great
★★★★★
★★★★★
Frank M - January 28, 2023
  Verified Purchase
Lock lid kit
Easy to install, turned washer on and did the same things as the old part I replaced. Still locks when the washing cycle is over and complete. So I just unscrewed the top latch and use it like that.
★★★★★
★★★★★
Daniel F - December 31, 2022
  Verified Purchase
DIY Washer Lid Switch Replacement
Replacing a lid switch on a GE Model GTW750CSL1WS Top load Washer. Easy Repair with < 45 minutes required. Side Notes: 1) The part that shipped was not the same as what comes factory but it retrofits into the same areas during replacement. 2) Be sure to reconnect any poly lines that may come loose when the control panel is opened. Otherwise, the machine will not work!!!
  • 1
  • 2
  • 3
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 19 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lid wouldn’t lock keeping machine from working
Unplugged the machine, pulled it away from the wall, didn’t have to disconnect water lines, set the parts out on the counter as I went over the instructions a couple of times, followed the directions, plugged it back in, worked perfectly again.
  • MIKE from POMONA, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the machine was spinning after a load was done,
any electrical device unplug the power cord. I followed the instructions the best I could understand them. but once the part was removed I took pics from my cell phone of how the wiring ran, and also what other connections I had to undo. all connections were made, connected the hot n cold hoses, plugged into the washer no beeps or sounds as before opened the hot n cold water valves, and the tub was being filled with water. could not turn on the washer, no lights or beeps... so I gave up I spent too much time on this machine and money too, hope to get an RMA for the Lid Switch assembly
Read less
  • Adelmo from El Prado, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The machine stopped working completely! My wife went on YouTube,and learned that it could be the motherboard or the door latch. We changed both, and the washer would only fill but did not drain, and spin! We called a serviceman, and he had to program the service board,but said that the new door mech
We changed the circuit board once, and the door latch mechanism twice because we ordered a faulty part. Then we had to hire a service man to program the circuit board, and to inform us that the door latch mechanism was faulty.
  • Scotty from OCEAN SPRINGS, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid lock blinks, washer will not operate
Put the parts in, turned washer on.....lid lock still blinks, will not operate. Suggest the control board that sends the signal to the solenoid lid lock switch is defective. Buying a new washer, scrapping this one.
Other Parts Used:
LID LOCK SERVICE KIT Lid Lock Striker
  • Lawrence from VERHALEN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not start
The parts I ordered were made of junk plastic and did not match up with the the existing parts. The parts did not end up fixing the problem and I bought a new washer instead.

Waste of money
Other Parts Used:
LID LOCK SERVICE KIT Lid Lock Striker
  • Jack from KENT, OH
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid was forced open and broke latch
Follow the super simple, precise instructions and it is very easy. Only harder part was unclipping the front of the lid.
  • Chris from LARGO, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not empty from washer and lid switch kept clicking
The most important item I learned is the original lid switch is no longer available. It has been replaced with the entire Lid Switch Assembly. I read the new switch is magnetic versus the old which was mechanical. The kit comes with everything you will need (switch, wiring harness, lid lock bezel and instructions). I found the written instructions to not be the easiest to follow. However, I found someone had done a YouTube video on the replacement which made the repair easy (under 15 minutes). Although I did the repair by myself, a second person would be handy to hold the washer cover and controls while changing the wiring harness. When testing the new switch, remember to test during the Spin cycle.
Read less
  • Cliff from ATLANTA, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was not filling with water
My son installed the new parts.
Other Parts Used:
LID LOCK SERVICE KIT Water Inlet Valve Assembly
  • millie from POWELLS POINT, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lid switch which signals that the washer door is closed malfunctioned. Even with the lid closed the washer would not spin because the washer was detecting the lid as open because of the faulty switch
The replacement part looked absolutely nothing like the defective part. The old part was easily accessible and was easily unplugged from the wiring harness. I assume when the new part came, I would just plug it into the wiring harness, snap some of the trim pieces in place and be done. 5 minutes. But no. The replacement part was completely different and came with its own wiring harness and length
of wire which had to be installed. The installation of the wiring harness was extremely complicated which involved popping off the control panel of the washer, prying up the top and disconnecting some other pieces to complete the install. There should have been a clear warning on the replacement part, that it was completely different and likely too difficult for a non-professional repair man.
Read less
  • Timmothy from EAGLEVILLE, PA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washing machine appeared stuck in the spin cycle
I watched a video on a few times that PartSelect sent me about how to make the switch from the broken lock set to the new one. And it really went just as the video showed. So far things are working.
  • Phyllis from RALEIGH, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Huey
June 2, 2024
can i dissconnect the lid lock and still have the washer work ?
For model number GTW460ASJ7WW
PartSelect logo
Hi Huey, thank you for reaching out. The lid lock can not be disabled on the machine, since the computer needs to check the lock function. It locks it, then unlocks it then relocks it for function so there is no way to bypass it since it will fail a lock check and then not work if you have it bypassed. We hope this information is useful!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Affresh Washing Machine Cleaner - 3 pack
$12.58
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
$19.09
  In Stock
Produce Preserver Filter
$21.50
$21.50
  In Stock
Affresh Cleaner
$19.09
$19.09
  In Stock
Cooktop Cleaner
$17.74
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
$21.14
  In Stock
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
LID LOCK SERVICE KIT
$ 85.35
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.