Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
GARY P - February 15, 2018
Verified Purchase
easy repair
The new pair (2 pieces) of cutter wire guides fit correctly for my Kitchenaid undercounter with a small bit of adjustment. There is a second small knob alignment extrusion on the face of each guide,near the middle. It had to be ground down in order for them to fit flush onto the metal cutter frame. A minute with a dremel tool did the job. A file or other tool can also easily correct this.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Overflow pump-cutting grid wire & spacers
Replaced pump-loop cutting grid wire loosely around spacers-hold loose end with pliers-working from back to front remove all slack. Pull until piano string tight. Wire will not break if not linked. Tighten front screw.