We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judy
February 22, 2018
Oven believes a meat probe has been inserted into the probe receptacle when it's not. Does replacing the meat probe insert fix this issue? Is there another way to correct this? Thank you
For model number Kemc308ksso
Hello Judy, thank you for your question. Yes, the most likely issue is the Meat Probe Receptacle 8186589. I would recommend replacing that part first. The other issue might be the control board itself. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
February 23, 2018
Is a repair manual available for this model? Thank you.
For model number KEMC308KSS0
Hi Judy, Thank you for the question. We do not sell the manuals but we do have them on line. Please see the links below. Hope this helps!
The Oven
https://partselectcom.azureedge.net/assets/manuals/FC0440F93BCA5FC606366500E56E1664BDECB81C.pdf
The Microwave
https://partselectcom.azureedge.net/assets/manuals/BDB863BC6E12126BE4BDC5064070AD3D053D9F5C.pdf
Was this helpful?
Thank you for voting!
Ron
March 26, 2020
My KitchenAid stove model kgss907sbl02 display shows "enter probe temp or remove probe. This happened after last use of the oven and without having the temp probe plugged into the jack located on the inside side panel (right side). The stove/oven was purchased in sept 2010. Any recommendations ?
For model number kgss907sbl02
Hello Ron, thank you for your question. If the probe was not used, and the display will not reset by turning the power off to the unit then turning it back on, we would recommend replacing the receptacle PartSelect Number: PS1486371. I hope this helps.