We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dermot
February 28, 2020
Where would i find installation instructions or a how to videu for this module
For model number wb13t10078 ge spark module in aa monogram gas stove top
Hello, Thank you for your question. You will need to look into removing the front panel once you get that off you will have access to the valves and the spark module. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tyrone
June 6, 2023
None of the burners spark for ignition. I'm thinking ignition module ?
For model number ZGU36NGH5SS
Hi Tyrone, thank you for writing in. The most common reason a gas stove won't light is that the igniter is clogged with debris. Over time, dirt and dust can accumulate on the igniter and prevent it from sparking. If this is the case, you'll need to clean it off in order for the stove to work properly. If after a good clean there is still no spark, then the Spark Module will have to be replaced. The correct part number for your model is PS2344294. We hope this helps.
All burners ignite however the ignitor continues to click while the 2 back burners are lit. What do you suggest?
For model number ZGU36L4RH3SS
Hi Louis,
Thank you for your question. It sounds like you may need to check the electrode and your igniter switch. If both of those parts are fine the problem may be in your spark module. I hope that helps. Good luck with your repair.