We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
October 24, 2023
New Water Inlet comes with a gasket. Where should the gasket be located? On the exterior or interior of the cabinet wall?
For model number SHE53TL5UC/02
Hi Steve, thank you for the question. The gasket is located on the exterior of the cabinet wall under the cover. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 2, 2023
This dishwasher displays error E26 when run in diagnostic mode.
The operational problem with it os that the water inlet solenoid is not activated at the start of the wash or rinse cycles but it does open later on in the cycle. Can you recommend which parts need to be replaced to fix the problem?
Thanks
For model number SHX53T55UC/09
Hello Mark, thank you for your inquiry. According to our research, the error code E26 indicates that there is an issue with the analogue pressure sensor. We would recommend replacing the float switch. The float switch comes with the housing. The float switch assembly for your model is part number PS8737139. It shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. We hope this information helps!
Good day to you,
My Bosch Dishwasher SHP65T55UC/2 came up with E-15 error and it now transpires that the water inlet valve (I think it is), at the bottom left hand corner of the machine is leaking. (I sent you a photo of the leaking part by email).
Kindly confirm part number/s so that I can order replacement/s.
Thank you!
For model number SHP65T55UC
Hi Rob, thank you for reaching out. According to our research, the E15 error code indicates that there is too much water at the base of the dishwasher. We would suggest checking the diverter assembly, part number PS8737182. It controls the flow of water to the spray arms. If too much water enters the dishwasher, it may start leaking and may reach the electrical components as well. We hope this information helps!