Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James K - April 24, 2024
Verified Purchase
Easy repair - if this switch is your issue.
The part that was sent was exactly the correct part. Communication was great and shipping was quick. I installed it, but unfortunately, it did not correct my issue of no water at the door. I have to assume that the solenoid/switch at the water supply at the back of the refrigerator is bad. I found that part here on partselect and will be ordering it and I’m sure that will correct my problem. Partselect is highly recommended!
★★★★★
★★★★★
Mark D - March 16, 2023
Verified Purchase
Refrigerator water dispenser.
Internet said you might want too try this.Followed the video, I'm back to filtered cold water.
★★★★★
★★★★★
James W - February 23, 2022
Verified Purchase
Worked well!
Up and running again!
★★★★★
★★★★★
James R - February 27, 2020
Verified Purchase
Great
Switch is great
★★★★★
★★★★★
Tyron D - April 21, 2018
Verified Purchase
Buy this part if you have to push hard for water to come on
If you have to push hard on the paddle to get the water to work then replace this switch. This switch will go bad after a while and now it is as good as new.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
January 10, 2023
I replaced the water dispenser actuator , about a month later a drip started to slide down the actuator , took it apart , all seamed ok , but still a slight drip. GLRS267ZA Frigidaire Refrigerator Would the micro -switch have anything to do with this , I still get water as usual.
Thank you , Gary
For model number GLRS267ZA
Hi Gary,
Thank you for your question. It is normal for a small amount of water to drip from the dispenser after using it. If water is leaking from the actuator, check the water lines to see if they are securely fastened and for signs of damage and leaks. Water will sometimes leak after the water filter has been replaced. This is because air gets trapped in the lines. If you just recently replaced the actuator try purging the lines to see if this will stop the drip. To do this, take a pitcher and dispense water into it. Do this a couple of times and this should clear the air from the lines. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hank
July 22, 2021
Ice door chute does not open to allow ice to drop into glass
For model number FRS26ZNHW1
Hello Hank, Thank you for the question. We suggest checking the Ice Door Chute Assembly and the Ice Door Wire for damage or wear preventing them from opening to allow ice through. We hope this helps!
Water dispenser not shutting off/ sticking at times. Is this the proper micro switch for this problem?
For model number frs3r5esb0
Hi Clint,
Thank you for your question. The part number listed under your model number for the micro switch that aids in the dispensing of ice or water is PS1532720. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Hi my ice dispenser quit dispensing ice makes ice but won’t dispense do you know what part would cause this.
Thanks
For model number GLHS37EHSB5
Hi Scott, thank you for the question. Based on our understanding, we would suggest checking the ice dispenser actuator first. If it is fine, the issue could be with the ice chute door assembly, part number PS1526426. It opens to let ice through when dispensing into a glass or other container. You may need to replace it to fix the issue. We hope this solves your problem!