Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
December 18, 2019
When my washer is in agitation cycle it make a load squeezing noise coming from this part
For model number W10006482
Hello Brian and thanks for writing.
It is possible that the rotor is faulty. There could be other parts causing this. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We do carry related parts for units just like yours. For example, part number PS11746840 Good luck with your repair.
The machine makes a whinin noise when first filling, and also when agitating,, although not all the time after tub is filled. I thought it was a belt, but this model doesn't look like it has a belt.... any idea's?
For model number MVWB865GC0
Hi Torrin, thank you for reaching out. Based on the description you have provided, we would recommend checking the water inlet valve, part number PS12348013. You may need to replace it to fix the issue. We hope this sorts out your problem!
Just wondering if you can tell me if it would be the rotor or seal and bearing gone on my washing machine ? My washer seems to be getting louder and I have noticed black splashes underneath it.
Thanks
For model number MVWB865GC0
Hello Trina, thank you for your question. The bearing is only available as part of the gearcase PS12741641. You may also want to check the impact absorbers as well, part# PS11746560. The black splashes may be rusted water. Good luck with your repair.
My washing machine makes a very loud noise when it is spinning? I keep looking just not sure where to start
For model number MVWB835DC3
Hello Joy, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the transmission, part number PS12741641, to solve the problem. Glad to be of help!
My washer is making a clicking sound during start up while in sense mode it sounds like gears skipping I took the rotor off and it looks like the top of the teeth are smeared off does this sound like the problem and is it a common problem
For model number Mvwb835dw4
Hello Kevin, thank you for your question. Our research indicates that it would be prudent to replace both the Rotor PS11769961 as well as the Stator PS11769960 as they work in conjunction with each other. We hope this helps.
Hello James, thank you for your question! Your first step is to remove the hoses from the water inlet valve. Be prepared for some water to spill out. Make sure the drain hose is detached from the standpipe or laundry tub. Next, use tape to secure the washer lid. Now, carefully tip the washer forward so its front rests on a towel or carpet. Use an allen wrench to fully loosen the rotor mounting screw, then pull the old rotor off. Be aware this may require some effort to install the new rotor. By carefully sliding it onto the tub shaft fully tighten the mounting screw. Now carefully lift the washer to its upright position, remove the tapes securing the lid and attach the drain hose to the standpipe or laundry tub. Reattach the hoses to the inlet valve, turn the water supply back on and plug the appliance back in to make sure it is functioning properly. We hope this helps, good luck with the repair!