Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Diane M - April 27, 2018
Verified Purchase
Replacement fit beautifully
We’re trying to get the most out of our old wall oven (from the 70s). We had to replace the broil and bake elements. We were so happy that Parts Select had both of these parts available. We received the order very quickly. Installation was easy. Now our 70s wall oven works like new!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broil Element
The job is pretty easy,4 screws pull ot coil,pull out of back of oven to remove the connections,the only problem that I had was the connecters on the new coil was not the right angle,fixed this by bending the connecters very carefully than a piece of cake.
Gregory from Lexington, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 28, 2024
We're trying to replace upper oven Broil Element. Electrical connections are approx. 1-1/2" apart at the back wall, not widely separated as shown on Part #6.
We have an illustrated Jenn Air brochure that shows our ovens to be a W211. Nameplate on front says ESC10/01276, Serial 18400129, Parts 9601
Thank you for any assistance!
For model number W211
Hello David, thank you for contacting us. Based on our research, the electric connections of the broil element for your model are wide apart. The electric connections for the bake element, part number PS11757476, are close enough. We hope that helps!