This genuine OEM drain pump is designed for washing machines. It is responsible for removing the wastewater from the machine during the drain cycle. The drain pump works by creating suction to draw water out of the tub and push it out through the drain hose. Signs of a faulty drain pump include the washer failing to drain water properly, leaving clothes wet at the end of the cycle, or loud, unusual noises during the drain cycle, such as grinding or humming sounds. Additionally, if the drain pump is visibly damaged, or leaking, then it likely needs to be replaced. You can find the drain pump located at the bottom of the washing machine.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Theodore L - December 27, 2023
Verified Purchase
Easy Peasy
Part came as expected. Installation went quick and easy. Just have the correct tools handy and drain the tub first.
★★★★★
★★★★★
Kris R - November 11, 2022
Verified Purchase
Simple to replace.
I am a 59 year old woman. I ordered this part on Tuesday and received it on Wed. I replaced it by myself and did 4 loads that night.
★★★★★
★★★★★
Braxton C - November 17, 2021
Verified Purchase
Super smooth and easy
Part came quickly, super smooth and easy all the way from ordering to receiving and applying to our washer!
★★★★★
★★★★★
Bernie K - October 28, 2020
Verified Purchase
pump work
parts fix right and worked great
★★★★★
★★★★★
Richard D - August 13, 2020
Verified Purchase
Great part,just like one removed.
Part was received just like I was told.easy to install.washer has worked fine since new pump installed. Thanks
★★★★★
★★★★★
GAIL J - August 11, 2020
Verified Purchase
Pump replacement
My husband isn’t a handy man but installing a new water pump took just minutes. I called the parts dept and talked to a very informative lady and ordered the part. It’s so nice to have damp clothes to put in the dryer and don’t have to wring out wet ones.
Thank you PartSelect for all you help.
★★★★★
★★★★★
Townhollow A - February 3, 2020
Verified Purchase
Washer Pump
Works great. It is so easy to get parts from here and they arrive within a reasonable time.
Thanks,
John Ruiz and Danyelle Denn Townhollow Apartments staff
★★★★★
★★★★★
Vivian R - October 10, 2018
Verified Purchase
customer service is non existence.
service is terrible.
October 10, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Shane S - September 28, 2018
Verified Purchase
Terrible Service...............
FIRST you sent us the wrong part. (which took a week and a half to get) When we called the man said "oops you ordered the right part, but we sent you the wrong one. We will get you the right one in the mail today" Well 2 weeks later we have still not received the correct part. We called again to ask for it and the man said "it was shipped out yesterday and you will receive it next Saturday" That is terrible.... you sent the wrong part and then would not OVERNIGHT it to us at your expense and then said it would be sent out that day, when in fact you did not send it out for a week. We canceled the order and now have to take the time out of my schedule to take it to the mail to refuse it. AND had to travel an hour to get the part we needed for our washing machine. At the top of this page it says "FAST DELIVERY" Well you need to take that down......................... SHANE SHOBERT
★★★★★
★★★★★
Brian P - August 1, 2018
Verified Purchase
Received quick
Exactly what we ordered
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not drain
Im a 58 year old single woman. Swap out of pump motor was so easy. Took less than 15 min. Ordered the part on Tuesday it came the next day. I installed it and did 4 loads of laundry. Great company.
Kris from W MANSFIELD, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy to install
I just drained the washer and unscrewed the 3 screws unhooked the hose clamp and installed the new one attached the hose and hose clip. Really easy. Took longer to try up water in floor than installing.
John from LEXINGTON, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
April 16, 2018
My Admiral washer fills up with water and I can hear it agitate, but when it gets to the spin cycle I hear no spinning and does not drain. Please help!
For model number ATW4675YQ1
Hi Joseph, Thank you for the question. I suggest testing the Lid Latch Assembly, PartSelect Number: PS3497627. If the switch is defective it will not allow the appliance to go into spin and drain. To test the switch, first and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
June 18, 2019
Washer will not drain
For model number ntw4516fw
Hello Joan, thank you for writing. For this symptom you will want to consider either the Water Pump, the Washer Drive Pulley, or the Agitator Repair Kit. The model number you provided is partial with multiple variations using some different parts. We will need the rest of the model number to look into the correct replacements. The missing information is a number at the end of what you provided.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Billy Harris
August 13, 2019
This washer work and goes throught cycles. However, when it get to spin it makes a alous scratching noise as if it having a hard time to spin and it does it again when the washer rinse, spin and drain as if same as above. 3 years old. I have a water pump well maybe sand is getting into the washer.
For model number MVWC415EW1
Hello Billy, thank you for contacting us. This could be due to either a faulty Washer Drive Pulley part number PS10057144 or Drive Belt part number PS11747978 for your model. I hope this helps and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cristian
March 13, 2020
Hello i have a Maytag washer machine model mvwc415ew0, but when i connected the drain pump make a different noise and the washer machine not start the normal cycle. I don't know what is the problem.
For model number WPW10661045
Good Day Cristian. Thank you for your question in regards to your unit (Model Number MVWC415EW0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Lid Latch Assembly (PartSelect Number PS3497627). 2) Lid Latch Strike (PartSelect Number PS11750882). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Hello Betty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS2342445 for the Drain Pump and PartSelect Number PS3508101 for the Shock Absorber Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
washer wont completely drain.can hear water under tub when rocking agitator
For model number WTW4800BQ1
Hello David, thank you for contacting us. The issue is most probably related to the drain pump, part number PS11757016. We would also recommend cleaning the drain filter and the drain hose to ensure that these are not clogged. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service. We hope this helps!
Was this helpful?
Thank you for voting!
Norma
May 8, 2019
Hi..my Amana washer won't rinse
For model number NTW4605EW0
Hi Norma, thank you for your question. There are a few parts that you should check when you are having this issue. The pump would be the first part to check. You should also check your switch and water inlet valve as well. I hope that helps. Good luck with your repair.