This is the right dishrack adjuster housing for various models of dishwashers. This housing is made of gray plastic and connects to the dishrack in your dishwasher to raise, lower, and adjust it. If this housing is damaged or broken, your dishrack will have difficulty adjusting and remaining supported. Replacing this adjuster housing is simple and only requires a flat tool, such as a flathead screwdriver. This OEM adjuster housing is sold individually, so if you require the left housing as well as the right, consider that before ordering.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Jenn-Air, Maytag.
Part# WPW10588165 replaces these:
W10320665, W10418316, W10588165, WPW10320665
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
3.3
Filter By Rating:
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mike D - December 1, 2021
Verified Purchase
Just the part we needed.
Easy fix.
★★★★★
★★★★★
Molly C - October 28, 2021
Verified Purchase
Just the right part and easy to install
Just the right part and easy to install
★★★★★
★★★★★
Richard T - October 9, 2018
Verified Purchase
Not so great
Unfortunately what I thought to be a fairly easy task of replacing some parts on my dishwasher ended up being not so great. When installing some some plastic replacement parts with tabs and clips, they readily snapped off, causing me to lose any more interest in repairing my dishwasher after an already almost $200 parts cost. Not real happy, just haven’t had the patience to call and complain yet, but not happy
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tamra Staiger
February 19, 2019
This part says to see 2a on the diagram but there is no part labeled 2a. Can you please clarify what part this is on the diagram?
For model number KDTM404EWH2
Hello Tamra, thank you for your question. The item # 2A is the Right Side Rack Adjuster Housing PartSelect Number PS11756593. This is the square plastic housing cover for the adjuster that is on the right side of the rack as you're looking at the unit. The item# 2 is Part Number: PS11756592 and is the left hand rack adjuster housing cover. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
James
November 8, 2021
The part I need is in the upper rack adjuster housing. The rack will drop down with a heavy load. When I move the rack back up or press it to lower there is a click in this housing. Would appreciate your telling which part I need and a video I replacement video to determine if I think I can handle installation. Thanks
For model number kdte104dss0
Hello James, thank you for your question. The left Adjuster Housing is part number PS11756592, the right is PS11756593. Parts inside and around the housing are the Adjuster Arm Clips, the Upper Rack Adjuster itself (one for each side), the Dishrack Adjuster clips and the Positioners. Please see the linked video for a repair on a similar model. We hope this helps!
There is a plastic part that is in the shape of half a square. This snaps onto the w10350376 assy. It helps attach the rack adjuster kit to the rack to keep it from moving back and fourth. It fits in the 3 slots in the center of the piece. All the kits do not include this part. Do you have the part number and how i can order 1. A picture would help. I took a picture but there is no way to attach it.
For model number KUDS30ixss7
Hello Sherilyn, thank you for writing. I believe the piece you are referring to is the Housing part PS11756593 and the Adjuster Housing Cover part PS11751101 for your model. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Phil
July 4, 2019
Does this part come with internal components or is this just the housing?
For model number PS11756593
Hello Phil, thank you for writing. This is the right side Rack Adjuster Housing for your model. The other components associated with it are sold separate. We will need the model number for your dishwasher to locate the other parts. We look forward to hearing back from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Daniel
February 10, 2020
Why are the left and right side different prices? They are the same part just right and left handed.
For model number KDTE254ESS2
Hi Daniel, thank you for your question. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the parts. We try to keep our prices as low as possible, but do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind the prices. Good luck with your repair.