We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Margaret
November 26, 2017
My dishwasher will not start. There are no lights with the touch control panel. It is apparently not getting power, but the garbage disposal attached to same house wiring works fine. What part might be defective?
For model number KUDS30IXSS6
Hello Margaret,
Thanks for your question. We would recommend checking the door latch first to ensure the door is locking properly, but if that part is intact and the door is locking fine, it is likely an issue with the control panel which should be replaced.
I hope this helps.
Two of the control lights are on, but slightly dimmer than the others. They stay on all the time now. Its the 4 hour delay and cancel drain button. Ran a normal cycle last night and seems to be working fine, just those 2 lights stay on. Sometimes the buttons don't work and ive had to power down the dishwasher and power it back on again to get working again. Do i need a new control panel?
For model number KUDS30IXSS0
Good Day Chad. Thank you for your question in regards to your unit (Model Number KUDS30IXSS0). Based on our research you may need to replace the electronic control board (Part Select Number PS11753985). The manufacturer also requests that you contact them at 800-541-6390 when having this issue (according to the owner's manual). Hope this helps. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cassie
September 20, 2017
My control panel lights up ,but doesn't wash it goes to drain do you think replacing control panel will correct this problem?
For model number KUDS301XSS7
Hi Cassie,
Thank you for the question. It sounds like the cycle timer is defective and is skipping the wash cycle. The timer for this model is built into the control board, PartSelect Number PS11773157.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Allan
January 15, 2024
kitchen aid dishwasher. Need plastic clips to secure touch panel.
What part number?
For model number KUDS30IXSS1
Hi Allan, Thank you for writing. The Clips are only sold as part of the Touchpad and Control Panel - Stainless Steel. We hope this helps!
Was this helpful?
Thank you for voting!
Chris
July 15, 2019
My dishwasher just beeps continuously when it is closed and it does not respond to button presses. I have tried cycling the power and cutting it off at the breaker. Should I replace the control board?
For model number KUDS30IXSSA
Hi Chris,
Thank you for your question. If the dishwasher is beeping continuously, it may have had a recent power surge and it may need to be reset. Try unplugging the dishwasher for 5 minutes to allow it to reset, if you turn it back on there is likely an issue with either the membrane or the electronic control board. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!