Average Repair Rating: 2.0 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lamp replacement
1)Power off 2) Remove frame covering front timer display - screw on the bottom 3) unscrew time display - 4 screws 4) unsnap lamp spring clip 5)replace lamp
Peter D. from Smithtown, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
17 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
repalced bulb.
The instructions from another customer was helpful. I concur with another comment I read while researching this proceedure. What Idio-- would design a microwave that required pulling the unit from the wall and removing the top panel just to access. It is good idea to unplug the transformer and capacitor wires before proceeding. I also goo
... Read moregled a schematic to see the parts layout. Remember not to touch the bulb with your fingers. Use a cloth or paper towel.
Read less
Nelson from Weeverville, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
9 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This is a small halogen light bulb for the microwave. This is the third time it has had to be replaced.
This is the third time that the bulb went out.It took two Sears service technitions to remove the entire appliance out of the cabinet. The entire top has to be removed and the insolation has to be pulled back to get to the electrical wire. I am waiting for an appointment to get Sears to do it again. The door springs have broken and you ha
... Read moreve to make sure the door is closed before walking away. It has a heavy glass and the weight is pretty heavy. Robert.
Read less
Robert from LAGUNA VISTA, TX
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
7 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light out and Door spring broken
Remove side deco strips to remove screws that hold to cabinet. Pull microwave out and set on saw horses (power cable should be long enough to do this). Remove screws to top cover and lift enough to remove all connectors from the front panel pcb. Remove grounding wires from next top lid. Remove connectors from transformer on rigt side and
... Read morethe two connectionss at the rear fan assy. Remove top cover/vent assy. Remove the next top cover to get access to the light bulb assy. Use a cloth or kleenex while handling the new bulb as you replace it. The clip thta holds the bulb is easily released and use reverse procedure when assembling. For springs those can be replaced without removing the microwave from the cabinet. Remove the 2 screws that hold the door together accessed from the inside of the door at top. Pull door up to release from the clip at the bottom. Remove the broken spring and replace with new one. Use a screwdriver to help twist the torsion spring to clip into place. Replace door assy in reverse order.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith
August 27, 2017
How to replace the light bulb. I do not have a cover, and cannot pull he bulb out by hand
For model number KBMC140HSS03
Hi Keith,
Thank you for your inquiry. You are looking to replace a bulb on the inside of your appliance. You will have to go through the top vent to be able to replace this part. First make sure you disconnect the power. Then remove your vent above the door. This should expose the top insides of your microwave. Your bulb will be attached to a socket inside. Just pull it out gently and then replace it with a new bulb. I hope that helps. Good luck with your repair.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 14, 2020
I am trying to replace the light bulb that shines down from the bottom of the microwave on to the surface below. I got the bulb out, but with out taking the whole microwave out of the wall and turning it over, i cannot see how the bulb goes back in. Do you have any suggestions?
For model number KHMS2050SSS
Hello Richard and thank you for writing.
You should be able to line up the prongs and just push the new light bulb in.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair
https://www.youtube.com/watch?v=-yUtoBg17Jg&t=78s
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robin
January 22, 2020
For the microwave portion: Light bulb burned out and replacement has been ordered. How do i replace it?
For model number GMC305PRS00
Hi Robin, thank you for your inquiry. You are looking to replace a bulb on the inside of your appliance. You will have to go through the top vent to be able to replace this part. First make sure you disconnect the power. Then remove your vent above the door. This should expose the top insides of your microwave. Your bulb will be attached to a socket inside. Just pull it out gently and then replace it with a new bulb. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
DAN
February 14, 2023
What is the voltage and wattage of the microwave oven light WPW10440740?
For model number KEMC378KBL01
Hi Dan,
Thank you for your question. The light bulb has 12 volts and 5 watts. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
November 24, 2019
I need the microwave lamp cover
For model number GSC308PJB05
Hello James, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348897. Hope this helps
Hello Mary,
Thank you for the great question. First step is to please make sure the electricity is turned off and the or the oven in unplugged. Once there is no power to the oven you will need to remove the glass cover over the bulb by removing the small retaining clip, once the clip is removed you should be able to slide the cover off. You can pull the bulb out of the socket and push the new one in place and then reinstall the glass cover. You may need to use a screw driver to loosen the clip that holds the glass cover and then tighten it once you are done.
I hope this helps. Good luck with this repair!
Was this helpful?
Thank you for voting!
Carmen
December 17, 2018
The light bulb in the top of the microwave is burned out.Looks like a halogen bulb.
how do i replace it?
thanks,
carmen
For model number GMC305PDB07
Hi Carmen, thank you for your question. Looking at your model information unfortunately we do not have any information for your model specifically, but we do have a general video that will show you how those parts are generally installed. You can view that video here: https://www.youtube.com/watch?v=-yUtoBg17Jg&t=78s. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Tony
August 1, 2019
Is there any way of replacing the bulb without pulling the entire unit out from the wall cabinet? If not, please take me through the steps to access the bulb in the microwave and associated parts (spring, lamp holder, bulb,etc.) which inadvertently got pushed up into the space on top. Poorly designed and a pain!
For model number KEMS377GBL3
Hi Tony, thank you for your question. If you have accidentally pushed the assembly up into the inner parts of your microwave then you will have to pull it out if you cannot fish it out yourself there. There is no other way to line it up if you cannot bring it back through yourself there. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Donna
November 15, 2017
How do I replace this bulb? Do I have to remove the entire micro wave oven? Or just the top vent? How do I do that?
For model number KBMS1454SSS1
Hi Donna, Thank you for the question. Here are the steps a previous customer took to install the lamp. "Remove side deco strips to remove screws that hold to cabinet. Pull microwave out and set on saw horses. Remove screws to top cover and lift enough to remove all connectors from the front panel pcb. Remove grounding wires from next top lid. Remove connectors from transformer on right side and the two connections at the rear fan assy. Remove top cover/vent assy. Remove the next top cover to get access to the light bulb assy. Use a cloth or Kleenex while handling the new bulb as you replace it. The clip that holds the bulb is easily released and use reverse procedure when assembling". Hope this helps!
Was this helpful?
Thank you for voting!
Gerald
April 3, 2018
Light is out in microwave. Looks like led bulb. Is it and how to replace it ? What is part number.
For model number GSC309PVS02
Hi Gerald,
Thank you for your question. It could be. It could also be the wiring and socket. You would have to test the parts to see which is giving you the issue. To replace this part make sure to unplug your appliance. You will then remove your control panel. You will have to remove the braces on the top and bottom of the microwave so you can pull it out far enough to get to your light socket. I hope that helps. Good luck with your repair.