Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas R - June 11, 2019
Verified Purchase
Simple works as expected
Easy peasy
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
board was blown
second time on this dishwasher in 5 yearss. removed the front cover as well as the indicator panel. board slides and unhooks . I should have taken a picture of the wire connections but the colors matched sockeets matched and i remembered it well. hardest part was putting the front cover back on.
works great. wife was very
... Read moreimpressed :-) saved proably $400.
Read less
Thomas from GREAT FALLS, VA
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
September 13, 2017
The rinse only light stays on (not very bright) having trouble starting the dishwasher at times. Would not do anything at all until i turned off breaker switch for a few minutes, then it started. Touch pads non responsive. Is it the the control panel or the control board? Whats the difference?
For model number KUDCIOIXSS3
Hi Bill,
Thank you for the question. This usually means the control board will need to be replaced. The control panel if the front plastic part that has the words and overlay and the board is the electronic part that controls the appliance.
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
August 25, 2017
Heat dry light will not come on when button is pressed. Is this the control panel or the control board. Also, since the light won't come on i presume i'm not getting the heat dry cycle when the dishwasher runs?
For model number KUDS30FXBL1
Hello Fred, thank you for contacting us. This could be either the control board or the control panel. The panel could have a short and is not sending signal to the board, or the board may not be receiving it properly. You may want to have these 2 parts tested to determine which is at fault. Hope this helps!
My panel would light the delay light and cancel lights dim on and off. I got the machine to wash and the lights went off and did not show the Green light when it was finished and it went through the complete cycle. Now i can't get the machine to start and the two lights are dim. Is it the board or control module?
For model number kuds301xbl4
Hello Dale, thank you for your question. If your control panel is not lighting up then the first thing you should check is the fuse. You have to adjust your meter to the Rx1 setting. Touch the edges of the fuse with the mulimeter probes, If it goes to 0 then the fuse is good. If the multimeter does not move at all you need to replace it. If the fuse is not bad, the issue is probably the electronic conrol board itself, part number WPW10380685. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Hill
November 7, 2017
No lights, does not start or anything. Have elect to it. Is it control panel?
For model number KUDC10FXSS3
Hi Hill, Thank you for the question. This sounds like an issue with the replays on the control board. The relays are not repairable so the board will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank White
July 22, 2017
1hour wash light will not go out, will go from bright to dim when pushed. Washer will stop in mid cycle. Will this be the circuit board?
For model number KUDS30FXSS0
Hi Frank,
Thank you for your question. It does sound like it could be your Electronic Control Board that is malfunctioning.
I hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephen
January 22, 2019
Our dishwasher usually runs fine but occasionally the control panel is non-responsive. If i switch the breaker off and back on, it will start working again. Recently, we have had an electrical burning smell when we run the dishwasher. It appears to be coming from inside the front door. Are these two problems related and which parts do i need to rectify them? Thanks for your help.
For model number kudc10ixss4
Hello Stephen, thank you for your question. It sounds like you may be having an issue with Part Number: PS4704481 thermal fuse. This part can cause the touch pad to become non responsive and can cause that smell. We would recommend replacing that part and checking the wiring from the panel to the board for any burn or scorch marks. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
September 22, 2017
My dishwasher turns off mid-cycle, all lights work. Is this a control board issue?
For model number KUDS30FXSS1
Hi Pam,
Thank you for your inquiry. There are a couple of reasons why your dishwasher is turning off mid cycle.
I hope this helps. It could be a tripped breaker, a broken motor or a broken latch, or it the dishwasher maybe set to a short washing cycle with a longer drying setting. You may have to consult your owner's manual for further instructions regarding the various cycles on your dishwasher. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mark
February 6, 2019
The wash cycles are not completing full cycle and the dryer is not turning on every time. Is this the control board issue?
For model number Kuds30fxsso
Hello Mark, thank you for your question. We would recommend testing the heating element and Thermostat first. If those parts have not failed, the issue would be the board. I hope this helps.
Do you offer any instructions on replacing the control panel
For model number KUDS30IXSS1
Hi Joe,
Thank you for your question. There is a video on our website that you can reference on how to install the electronic control board. The dishwasher and the electronic control board in the video may not show exactly like the ones you have, but it will give you a general idea on how to install the part. You will find the video under part number PS11748220. Here is a link to the video, https://www.partselect.com/PS11748220-Whirlpool-WPW10084141-Electronic-Control-Board.htm?SourceCode=15. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kamal
January 22, 2020
Hi, the dishwasher not turning on, no lights on control panel, when turned off and on from the breaker only a short 3 blinks of the finishing lines light on the small right window. I read the q&s here, some say its a door latch problem, others say if its a door latch problem the washer will have lights on the control panel but it will not start then it’s a control board problem, my question is will door latch problem prevent any power or lights to the dishwasher? Thanks
For model number KUDS30CXSS4
Hello Kamal, Thank you for the question. In most cases no lights mean it is a control board, however if you do have lights when power is restored it means the board is still receiving power. It is best to test the Switches in the latch first before replacing the board. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.