We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Himanshu
November 5, 2022
I have FIE0 error displayed with "Replace Oven UI" displayed on the screen. It happened after a power surge due to a storm.
For model number KEMS378SSS04
Hi Himanshu, thank you for the question. The F1-E0 code indicates that the main control is locked up due to an unexpected communication event. This is often corrected by cycling power. Disconnect power for at least 30 seconds. Re-apply power and observe for at least one minute. If the code re-appears, replace the control board, part number PS11752580. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
January 20, 2023
My wall oven heats up on confection, switch to bake and as food cooks it loses heat and confection cooks to hot. Please tell me what parts I really need.
For model number KEMS308SSS02
Hello Mary, Thank you for writing. We suggest testing the Temperature Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Only easy convect cooking settings will work. Bake, broil, convection do not work. All other functions such as clock timer etc., are good. Is this a board replacement??
For model number KEMS308SSS00
Hi Krista, thank you for the question. Based on the description that you have provided, we would recommend checking the control board, part number PS11752580, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Seanny
January 2, 2024
Oven and microwave oven does not work on in oven mode. When set to preheat, it does not heat up. Microwave however works and heats. Technician indicated control board needs replacement, please confirm if this is the part as there are 3 pieces for control board parts. Thanks
For model number KEMS308SSS05
Hi Seanny, thank you for contacting us. Based on our research, the issue is with the oven control board, part number PS11752580. This board let you select the time and temperature settings for the wall oven. We would recommend replacing the board to fix the issue. Good luck with this repair!