Make sure you haven't got the discount earlier.
Housing WPW10179455
Fits your KUDE60SXSS3 Dishwasher!
★★★★★
★★★★★
Fits your KUDE60SXSS3 Dishwasher!
PartSelect Number PS11749682
Manufacturer Part Number WPW10179455
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Jenn-Air, Whirlpool.
Part# WPW10179455 replaces these:
W10179455
Customer Reviews
Average Rating:
2 Reviews
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Matthew W - February 26, 2019
Verified Purchase
No tools necessary! Perfect part replacement
The part looked just like the picture and just like the original! 10 minute repair, no tools required.
★★★★★
★★★★★
Miles P - January 26, 2018
Verified Purchase
The drain housing was just what I needed
The drain housing was just what I needed and it arrived quickly. My dishwasher leaks no more!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
January 19, 2018
Does part number PS11749682 come with a black rubber elbow?
For model number KUDE40FXSS0
Hello David,
Thanks for your question. Yes, this part does come with a black rubber elbow.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dale
February 2, 2018
The outlet on this part leaks when draining is there supposed to be a plug in it
Hi Dale,
Thank you for your question. All dishwashers will have a method to drain the water. Most models will have a single motor driven pump with two separate compartments, one for circulation and one for drain, each with its own impeller. Other types will have a separate drain pump and some will utilize the main circulating pump in conjunction with a drain solenoid and diverter valve or flapper. On models that use a separate drain pump you should check to see if there is any obstruction to the input and output of the pump and also verify that there is power getting to the pump motor during the drain portion of the cycle. If both check ok, then you should replace the pump and motor assembly.
On models that use a drain flapper and solenoid, again you should check for any obstructions and verify that the solenoid is getting energized and that there is continuity. Use a multi-meter to make these tests. Check that the linkage operating the flapper or diverter is moving freely and replace any defective parts. On models that have a two section pump, the drain impeller may be at fault. First, verify that the motor is running in the proper direction. If the motor does not run, then check for power at the terminals on the motor. If voltage is not present, then you should check door switches, timer or electronic control as a possible cause. If proper voltage is present, then the motor windings could be open. If the motor is humming, then the problem could be that the drain impeller is jammed or the motor could be seized. If the motor is seized, then the motor or motor and pump assembly will need to be replaced. The electrical checks can be made with a multi-meter.
Disassembly of the pump will be required to determine if the impeller is the problem. The drain compartment is typically located beneath the circulating compartment. Remove the lower rack, spray arm, pump cover and filter assembly to gain access. Inspect the drain impeller for damage or wear and replace if required. Also check that the food chopper is in good condition and not allowing large food particles to clog the drain outlet, and that both the chopper and impeller are turning freely. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Gib
December 18, 2018
Does this part fit Kenmore elite model listed? Wasn't in the list
For model number 665.13962K017
Hello Gib, thank you for your question. Yes, the housing part number WPW10179455 is compatible with your specific unit. I hope this helps!
Was this helpful?
Thank you for voting!
Nash
January 13, 2024
Is this compatible with my KitchenAid KUDE70FVPA2? The rubber elbow has a tear; can the rubber elbow just be replaced, or is this entire part required?
For model number KUDE70FVPA2
Hello Nash, thank you for your question. Yes this housing is compatible and suitable to correct the issue. We hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749682
Manufacturer Part Number: WPW10179455
Manufacturer Part Number: WPW10179455
Brand
Model Number
Description
Kenmore
66513962K014
Dishwasher
- Kenmore Dishwasher Model 665.13962K014 (66513962K014, 665 13962K014) Parts
Kenmore
66513963K017
Dishwasher
- Kenmore Dishwasher Model 665.13963K017 (66513963K017, 665 13963K017) Parts
Kenmore
66513964K014
Dishwasher
- Kenmore Dishwasher Model 665.13964K014 (66513964K014, 665 13964K014) Parts
Kenmore
66513969K014
Dishwasher
- Kenmore Dishwasher Model 665.13969K014 (66513969K014, 665 13969K014) Parts
Back to Top
Housing
$
106.53
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.