Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ALFRED
May 2, 2019
My washer will not agitate or spin and shows f01. Will this board take care of my problem (10163007). Washer fills and the door locks ok
For model number 11047512603
Hello Alfred, Thank you for the question. The F01 indicates a failed electronic machine control board, PartSelect Number PS11749298. This error code can at times be caused by a glitch or power surge. You might be able to clear this code by unplugging the washer for about 5 minutes. If the code returns, then the electronic machine control board will need to be replaced. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
ALFRED
May 2, 2019
After installing the ps11749298 machine control board the f01 error code came up again. Unplugged the washe waited 5 minutes did not help. The washer fills started agitation. Drained. Slow spin went to code f01 again. Would like to have more help. Thank you
For model number 11047512603
Hello Alfred, thank you for your question. The F1 Error code means the control board is having difficulty communicating with the motor. If the board was replaced but you're still getting that error you should check the wiring between the board and the motor, and if that is ok, not loose or degraded then the issue is probably the motor. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cindy
September 9, 2019
Front load washer blew a circuit and it won't agitate or spin. The water runs in and the door stays locked. When we unplugged it and plugged it back in after 10 minutes. We changed the setting to an express load and it ran in water, sat there, then when it came time to drain, the wash light started flashing and it just stopped.
For model number 11047561601
Hi Cindy, thank you for your question. You may want to take a look at your door lock for being the issue. If that part is not working then it will not allow your appliance to spin. If that part is not the issue then you will have to look at your motor or control board being the issue. Good luck with your repair.
Was this helpful?
Thank you for voting!
Charles
February 12, 2020
Washer shuts completely off in mid cycle, with no error code.
For model number 11047532600
Hello Charles, Thank you for the question. If the washer stops mid cycle the Door Lock Latch might be defective. We hope this helps.
Need electronic machine control. My part # on plastic box it fits in isw10133536a.? Just trying to get the right one on circuit board in side is #w100222760.. help
For model number 110.475117
Hi Lee,
Thank you for your question. The part number listed under your model number for the washer electronic control board is PS11755954. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!