Replacing your KitchenAid Dishwasher Feed Tube with 3rd Level Spinner
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher, Dryer.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# WPW10077859 replaces these:
AP6014861, 8557695, 8559849, W10077859, WP8559849
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.8
Filter By Rating:
5 Stars
9
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Doug B - March 27, 2023
Verified Purchase
One of the easiest repairs I've done thanks to the videos
I received the part very quickly and was pleased with the service. I reviewed the videos before starting, and that made the repair a walk in the park. It has restored the washing machine to it's like new capabilities. Pressing the part onto the lower tube wasn't as easy as the video showed, but I kind of expected that. I simply braced it on the counter and rocked it onto the joint. PS - I'm 81 years old so if it was easy for me, pretty much anyone should be able to do this repair.
★★★★★
★★★★★
Scott J - January 18, 2023
Verified Purchase
Shipped fast and easy to install
Because of supply issues I was not able to purchase this part anywhere local or online for over a year. When I was finally able to order this part it came fast and the install was easy. The only reason for. A 4 star review is that I only needed the little flapper like other people but had to buy the whole upper wash arm assembly.
★★★★★
★★★★★
Frederick R - September 3, 2020
Verified Purchase
Easy Peary repair
The part was promptly delivered in good shape. The instructional video made installation effortless. Glad I discovered PartSelect.
★★★★★
★★★★★
Chere M - May 28, 2019
Verified Purchase
So easy to replace - took literally 10 minutes
Quick shipping and easy fix.
★★★★★
★★★★★
John K - May 17, 2019
Verified Purchase
everything went well, instruction video is a great help
The part fit great and took care of the problem along with the food chopper I also purchased, the dishes are coming out very clean again, just as when dishwasher was new.
★★★★★
★★★★★
Margaret W - January 25, 2019
Verified Purchase
Dishwasher tube
The part arrived in good condition. After installing it we realized the problem still remained so there is a different cause we will now address.
★★★★★
★★★★★
Barry P - December 21, 2018
Verified Purchase
Easy repair perfect part
Received part in a timely manner.
★★★★★
★★★★★
Neil P - October 9, 2018
Verified Purchase
replacement part
I bought this item and installed it. It did not fix the problem, dang it.
★★★★★
★★★★★
Jeanette H - February 27, 2018
Verified Purchase
My husband had it in, in 5 minutes
The part came in very good condition. Working real well.
★★★★★
★★★★★
Ken S - February 24, 2018
Verified Purchase
Easy repair
The part arrived in good condition in s very short time period. It was easy to install and it appears to have solved our problem.
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
January 4, 2018
The question wasn't weather part #1 came with part #9. The question was does part #1 include the gasket for the two holes where part #9 slips into. I also need that gasket since there are two holes to seal shut and part #9 only slips into one of them. So, is there a way to get one of those gaskets to seal off the two holes on part #1?
For model number KUDS30IXSS7
Hi Ray, Thank you for contacting us back. Sorry for the mix up there. Yes the tube comes with the gaskets that fit into the 2 holes on the tube that #9 slips into.Unfortunately the gaskets are not sold separately from the feed tube assembly. Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Ann
June 11, 2019
I think i understand what benjamin meant when he wrote "double hole runner gasket flapper thingies". Please confirm: Do i need to buy then entire feed tube assembly, if only the double flapper gasket (held within the feed tube) is broken? The broken part was taken out of the feed tube. It is about 3" long, about 1" wide, and looks like a tiny pair of grey rubber glasses with flaps over the lenses. Am i making sense here? Anyway, can i just get this little double flapper valve, by itself, to insert into the perfectly good feed tube? Or do i have to get the whole feed tube? Thank you.
For model number KUDS50SVWH4
Hello Ann, thank you for inquiring. It is only included with this Feed Tube with 3rd Level Spinner replacement for your model.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Benjamin
October 15, 2017
Does part #1 (water feed tube) come with the double hole runner gasket flapper thingies that allow you to insert the second level rack at different heights?
Hi Benjamin,
Thank you for your question. It does not come with part number 9 however it does come with your upper spinner. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Amber
April 27, 2018
Hello, there is no water coming out of the top white spinner in our dishwasher, i thought maybe the water feed tube needs replacing but do you think that is might be the issue or is there hose connecting behind the housing that may be the problem? Or is there a missing part on the water feed tube? I see a square whole so i'm not sure how the water gets fed up to the spinner..
For model number KUDS30FXSS8
Hello Amber, Thank you for your inquiry. We would recommend checking first to make sure the spinner arm and feed tube are not clogged. If you are getting water to the middle tube but not the upper tube, there may be a clog or crack in the tube. We would also recommend checking the manifold and water inlet valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lila
February 8, 2020
The glasses in the top rack are not getting clean on the inside of the glass. What do we check first?
For model number kuds30ixbla
Hi Lila. You will want to check the lower spray arm. Check to make sure nothing is clogged or gunked up and the seals are not damaged. Thank you for your question and good luck with your repair.
Looking at the feed tube and the flap on the upper of the two opening looks like it isn't closing as I think it was designed. Should I assume the upper spinner isn't getting much water pressure? Would that lead to the machine being noisier than it was?
For model number kuds03ftss0
Hi Mark,
Thank you for your question. If the dishwasher has low water pressure, then water may not come out of the top spinner. Check both the water pressure and the water inlet valve. If the water inlet valve is not working correctly, then it may not provide water to the dishwasher. Look for any signs of damage, wear, or cracking, visually inspect the water inlet valve. If your valve shows signs of any of the symptoms described above, you will need a replacement water inlet valve. If the spinner or the spray arms are clogged, then water will not spray out of them. You will need to remove and inspect them. If they are clogged, give the a good cleaning and use a pin to clean the holes. We hope this helps! If you have any questions, please let us know.
It's difficult to see through the dishwasher door, but the glasses and anything in the top rack doesn't come out clean. When I open the door while the dishwasher is running, it looks like the middle sprayer is not turning. When I pull out the top rack the rubber flap that closes the hole when not in use doesn't flap back to seal the hole. I tried plugging that hole with a plastic cap and lower the rack to use the lower hole with the flap but again, the sprayer isn't turning. Is replacement part #1 the one I should purchase to fix this problem or are their other parts in play? Thank you.
For model number KUDS30FXSS3
Hi Rafik, thank you for the question. Before replacing the water feed tube, we would suggest checking the middle spray arm and center support for any damage. If these are fine, the issue could be with the manifold probe, part number PS11748182. It supplies water from the main water feed tube to the middle manifold water tube. You may need to replace it to fix the issue. We hope that helps!