Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 12, 2018
Performed the following:(1) a cold reboot by removing power at circuit breaker
(2) system reset by alternating pressing "hi temp scrub" and "heat dry". during the test cycle, various buttons would illuminate on and off while different sounds could be heard as though it was testing the internal pumps, valves and motors. at completion of test, all lights turned off and the sounds ceased. no error codes were displayed
(3) checked door latch
(4) checked microswitch and thermal fuse for continuity
can you suggest what component needs replacing?
thank you
For model number KUDP02CRBS2
Hello Mike, Thank you for the question. In order to help we will need a bit more information. Can you tell us what is happening with the appliance or why you were running a test? Was it not powering on or not draining? The more details the better. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
March 3, 2018
I've replaced the control board but the dishwasher still won't run. It has the start/resume button flashing. I've tried resetting the board and still won't run. Do i need to replace the control panel also?
For model number kudp02crbs3
Hello Mike, Thank you for your inquiry. A flashing start light can indicate a problem with the door switch or control panel. You can test both parts with a multimeter to see if they are functioning properly. Hope this helps!
Was this helpful?
Thank you for voting!
Brian
September 11, 2021
The dishwasher will not run. The cycle buttons do not respond, option buttons do respond. I've run the reset and the only cycle button that lights is the rinse button. The reset seems to go through completely and motors turn on and off. It seems like the issue is the control panel but would like another opinion.
I have replaced the fuse and door latch and it ran for a few months and now this issue. Both the thermal fuse on the board and latch switch have continuity.
For model number KUDP02CRBS3
Hello Brian, Thank you for the question. With the information provided, this sounds like the Electronic Control Board will need to be replaced. We hope this helps!