Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bryan M - October 11, 2022
Verified Purchase
Heating Element
The part fit perfectly and was shipped pretty fast
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
July 26, 2019
My Kenmore elite osasis dryer is not providing heat but there was no code on the panel what could be the causing rhis issue
For model number 11067082600
Hello Dave, thank you for inquiring. For this symptom you will want to consider either the Heating Element Connection Wire part number PS334206 or the Internal-Bias Thermostat part number PS11746740 for your model. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
December 5, 2023
Dryer heats up but often needs an additional drying cycle to get the clothing fully dry which has never been the case before. The most likely culprit and replacement part would be?? Thank you...
For model number WED97HEXW1
Hi Michael, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the lint filter and the vent. If they are not clogged, then you may need to replace the heating element, part number PS11746338, to fix the issue. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steven
September 19, 2017
I have the above model Whirlpool dryer and the heat stopped working. Is the element # ps11746338, listed on this site, the only part i need to replace to get the heat working again? Or can there be another part that is the reason for no heat? My dryer access panel is located at the back and very difficult to get to just to look and test parts.
For model number WED95HEXWo
Hi Steven,
Thank you for your inquiry. If your dryer is not heating there are a few parts that you will need to check. You will need to check the thermal fuse, the high limit thermostat, the internal bias thermostat and the electrode sensor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Brian
November 9, 2017
The dryer heats up and drys for a while then kicks off the breaker. Could it be the thermostat? The dryer says "clean vent" but the vent is clean and free of lint.
For model number WED8500BW0
Hi Brian, Thank you for the question. When you clean the vent you need to make sure both the lint filter and duct vent and the vent leading from the dryer to the outside is clean. Lint and condensation can build up in the flex hose leading outside and the appliance will stop heating for safety purpose. While the dryer is running you can go to were the vent leads outside and make sure the flaps are opening up all the way. If they only open a bit this means the air is not flowing properly and there is a blockage. Hope this helps!
Was this helpful?
Thank you for voting!
Steve
January 2, 2020
My dryer is not drying at all. Is there a video on changing the element in this model dryer
For model number WED8200YW1
Hi Steve, thank you for your question. We do not have a video for your appliance specifically, however we have many videos that show how a part like this is installed. Here is a link to our YouTube channel: https://www.youtube.com/user/partselect/search?query=dryer+heating+element. There are a few videos listed there. Good luck with your repair.