We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Audrey
January 4, 2018
My dishwasher latches and runs for about 15seconds... then it stops running, but doesn't loose power. i have to slam it pretty hard to get it to actually start. is this likely the part i need to replace?
For model number DU1055XTSS2
Hi Audrey, Thank you for the question. You will need to disassemble the door latch assembly to see if there is a broken part there to know for sure. If nothing is visibly broken, I suggest replacing the two door switches, Part Number: PS11745501. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Habib
August 13, 2021
Dish washer stops middle of the run. If it continues to finish cycle it leaks ( not much). Is the problem the door latch or more than that? If so what are the part numbers, thanks.
For model number 665110739120
Hi Habib,
Thank you for your question. If your dishwasher is stopping mid cycle, the door latch actuator and switches are some of the parts that you will need to check. You will also need to check the heating element, the electronic control board, the drain pump and the circulation pump and motor. We hope this helps! Good luck with the repair!
Our dishwasher won’t turn on when the door is closed is this a latch issue
For model number Wdf310plaw4
Hello Latanya, thank you for your question. Yes, if the unit won't turn on when the door is closed there is a good chance the issue is the door latch issue. The switch has probably failed, which is part number WPW10274880. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Carol
February 19, 2019
Do you need to remove the handle when replacing the latch?
For model number DU1055XTPQ3
Hello Carol, Thank you for the question. The handle will need to be removed to replace the Actuator. Hope this helps, good luck with this repair!