We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
January 17, 2018
First is this part plastic?Also is there 7 places that except screw to go in to hold it.
For model number RBS305PVS00
Hi Thomas, Thank you for the question. This panel is made of plastic and has 2 screws on each side at the bottom corner and 5 screw holes around the opening where the touch pad is. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Natalia
April 3, 2019
My interior oven lights work, but I don't have any lighting for the control panel. When i push the buttons they beep but don't turn the oven on. The entire panel is dark.
For model number GBD307PRS01
Hello Natalia, Thank you for the question. This sounds like an issue with the Control Board, Part #: PS990206. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stephen
December 9, 2017
My Whirlpool built-in microwave/oven control panel is broken. How can I replace it? Do I have to pull the whole unit out to remove the panel? If so, how can I pull the unit out?
For model number GMC305PRB00
Hello Stephen,
Thanks for your question. Make sure the appliance is unplugged. Remove the two screws on the inside bottom after removing the two screws from the trim, then slide the old control panel upwards, which will unhook it from the frame.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
November 16, 2017
My interior oven lights work but i i don't have any lighting for the control panel. When i push the buttons they beep but don't turn the oven on. The entire panel is dark.
For model number gbd307prb01
Hi Jim,
Thank you for your inquiry. If the display on the control board is not lighting up, then you will need to replace the electronic control board. The part number for the electronic control board is PS11754737. I hope this helps. Thank you and have a great day!