Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Had a fault that tripped oven off code was DB92
Removed both oven doors to remove from the wall. Pulled the oven out of the wall. Removed all the sheet metal backing on the back of oven top and bottom. Removed the electrical,connections to the fan. Removed attach,net screws and pulled the fan. A bit of a pain had to twist pull and bend the metal bracket. Replacement fan had to b
... Read moree reversed came apart easily and reversed then reassembled. Fit in easily and attached electrical connections. Then reattached all the sheet metal backing bottom then top. Put oven back in wall then secured in place. Re installed the doors and applied power. Oven worked great as soon as we tested it. Great fix, works better than new!
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
F
July 29, 2019
Error code 4d21. Sometimes fan does not start as oven heats up. Have to turn circuit breaker off and on. Problem with fan or is there a sensor that needs to be replaced? Jennair 27" electric wall oven
For model number JJW8527DDB27
Hi F, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bernard
August 24, 2023
Error code 4d21
For model number JJW9630DDS. Serial# 300233380NG
Hi Bernard, thank you for the question. The error code 4d21 indicates an issue with the cooling fan. To solve this issue, you may need to check the cooling fan, part number PS11744234. If this part is faulty, you may need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Ron
March 14, 2019
When replacing the fan in the oven do i need the new bracket # 15 part?
For model number jjw8530dds
Hi Ron, thank you for your question. No, I would say that you only need it if your current one cannot be reused because it is damaged in some way. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.