Make sure you haven't got the discount earlier.
Orifice and Tube Assembly - Left Side WP5787D105-60
Fits your LGR3330ADZ Range!
★★★★★
★★★★★
Rated by 6 customers
Really Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
Fits your LGR3330ADZ Range!
PartSelect Number PS11742986
Manufacturer Part Number WP5787D105-60
Manufactured by
Whirlpool
Product Description
Orifice and Tube Assembly - Left Side Specifications
This orifice tube assembly is a genuine OEM replacement part for your gas range. This is a very easy repair. Start by removing the grates and use a strap wrench to loosen the burner heads. Disconnect the wires to the burner heads and unscrew the four screws to gain access under the main stovetop. Use a wrench to unscrew the gas lines to the orifice tube assembly. Install the new tube assembly and reassembly the remaining parts in reverse order.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas smell
This part works with the following products:
Range.
This part works with the following products:
Maytag, Amana, Magic Chef, Crosley.
Part# WP5787D105-60 replaces these:
AP6009813, 5787D105-60, 74009831, 74010793
Customer Reviews
Average Rating:
3 Reviews
★★★★★
★★★★★
4.3
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Theresa H - October 3, 2022
Verified Purchase
Easy to install
The part was a direct fit no bs
★★★★★
★★★★★
Juan F - June 11, 2020
Verified Purchase
Not an easy to find part
Fast quality delivery, and best of all this is only place I was able to find this part of a stove that was discontinue long time ago.
★★★★★
★★★★★
Catherine D - March 14, 2018
Verified Purchase
What I broke while cleaning
Correct part other then the orifices holes too big, when lit major flames. We just exchanged with the ones we took out as they were fine, I had broke the aluminum tubing by pulling up range top without unscrewing the screws at burners.....next time I'll know better, good excuse not to clean it lol.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 6 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
It had broken gas lines
All I used was a Phillips screw driver and a small adjustable wrench. I removed top burners and wires i then removed small screws holding the top cover to the assembly. Then removed top cover, in the front I removed the four nuts holding the assembly. I removed assembly and installed new ones. Assembled back the same way.
Other Parts Used:
-
Victor from DINUBA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke both the left & the right side orfice tubes
This repair is very easy. If you ever have to remove the range for any reason, for deep cleaning or otherwise, "PLEASE REMEMBER TO REMOVE THE 4 SCREWS located on the bottom of each burner! Don't do what I did! I tried to pop the range without removing the screws, & broke ALL ORIFICE TUBES! When doing this repair, shut the main gas off in
... Read more
the back of the oven. All you need to do is remove the 4 screws as I indicated earlier, using a Phillips screw driver, once this is done, twist off all 4 burners ("YES THEY TWIST OFF!")These twist off about 1/2 turn counter-clockwise, this will expose the electronic ignition wires connected to the ignitor electrodes, these wires are color coordinated, so remember to either write down how these wires came off, or if you are like me, just remember where they came off from, remove these "VERY CAREFULLY" as these are very delicate to remove, especially, if the ignitor electrodes are brittle or old, if they are in too bad a shape, REPLACE THEM! Once you have removed all wires connecting to the ignitor electrodes, set down the 4 burners, & the range is ready to be removed, using a flat, regular, screw driver or a small tire iron, insert the flat end into the bottom of the range, just above, where the top of the oven door is & the bottom of the range meets, the top of the oven door, the gap in-between is the spot, you want to pry, The range is held down with retainer clips, then, lift the range about half way up & remove the range. Taking a look inside, you will see the Orifice tubes & how they connect to the burner valves. Remove the two lines going to the burner valves with the use of a 1/2 wrench, or if you don't have one, a crescent wrench will do, once this is done, there is a wire restraint @ the top of the orifice assembly, please do not cut it, but turn the assembly upside down, & with your index finger & thumb, squeeze the restraint & it should pop off, then remove & replace the orifice tubes, when you are tightening the lines, only use hand-tight torque, do not over-tighten, as this will break the orifice tubes! The rest is putting the range on the oven, put the range back on the oven, reversing the procedure on taking it apart. When you put the range back on the retainer clips, you need to push down on the edge of where the clips latch in. This took me about 10-15 minutes to do. Good Luck!
Read less
-
Gerald from Cherry Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable), Wrench set
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lifted stove top broke gas lines
Replaced gas line and orifice assembly. Had to swap orifice for the LP Gas orifice I purchased with the stove. Install and adjust took about 45 minutes to complete including clean up and test.
Other Parts Used:
-
George from Big Rapids, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
7 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 front burner (RIGHT AND LEFT) doesn't work
That's easy...unscrew the 4 top burner and open it slowly.
Open the tube's nut...i used the wrench.
Then install the new one.
And put it back together like before the first thing, and we got 2 burner worked.
It takes about 20-30 minutes.
Thanks Partselect.com
Now i know where i have to go if i need something ... Read more special part for my household.
Open the tube's nut...i used the wrench.
Then install the new one.
And put it back together like before the first thing, and we got 2 burner worked.
It takes about 20-30 minutes.
Thanks Partselect.com
Now i know where i have to go if i need something ... Read more special part for my household.
Read less
Other Parts Used:
-
Johana from Philadelphia, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
28 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken front burner gas lines
The biggest challenge with the repair was propping up stove top. This range doesn't have a prop arm, and the burner assemblies are attached by screws to stovetop. DIY'ers take note: take a minute to learn how your stove is designed before attempting to clean it by lifting the stovetop too high and breaking the front burner gas lines like
... Read more
I did on mine. Fortunately the new burner assemblies fit perfectly with no gas leaks, and the stove is working good as new. Thanks PartSelect!
Read less
Other Parts Used:
-
Richard from Salinas, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
29 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broke gas supply lines to burners atpoint closes to controll knob. I did not remove 2 screws holding lines to stove top and when I lifted top they shear off. Rick Alice's husban thank you
. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Other Parts Used:
-
ALICE from Crete, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam
December 14, 2017
Does the tips work on propane or are they just for natural gas? If it doesn't work for propane how can i get the tips for propane?
For model number MGRH752BDW
Hi Sam,
Thank you for your question. These parts would automatically be set for natural gas. I have listed your LP conversion kit down below for you. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
John
May 19, 2023
Can't I just buy the tubing?
For model number Mgr4451bds
Hello John, thank you for the question. The tubing does not come individually. You may need the complete orifice assembly, part number PS11742986. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742986
Manufacturer Part Number: WP5787D105-60
Manufacturer Part Number: WP5787D105-60
Brand
Model Number
Description
Back to Top
Orifice and Tube Assembly - Left Side
$
93.22
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.