Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kyle M - April 3, 2018
Verified Purchase
This (suggested) part did not fix the issue
This recommended part from PartSelect via IM did not work. Original issue was Medium & Hot did not work but Low does. After installing the new part neither Low, Medium or Hot worked. I reinstalled original part and now Low works again but Medium and Hot do not. I just spent over $50 for nothing.
★★★★★
★★★★★
Andy M - February 6, 2018
Verified Purchase
Perfect replacement
Speedy delivery. Back in business!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lillian
April 9, 2018
The end of cycle signal is getting very faint, to the point that it can barely be heard anymore. What part do i need to fix this. We have already replaced the thermostats (2 in a kit) and the thermal fuse. Now it is the buzzer at end of cycle! Thanks for your help.
For model number LER8858EZ2
Hi Lillian,
Thank you for your question. I have listed the part information for your buzzer switch down below for you. Good luck with your repair.
This may sound like a dumb question but: I recently wrote about my buzzer barely sounding at the end of a cycle. This part #ps11741509 says it allows you to change dryer cycles. How does this affect the buzzer? The buzzer is a different part. I do not understand. Also is there a video showing how to install the part? Thanks for your help.
For model number LER8858EZ2
Hello Lillian, thank you for your question. The cycle selector switch will not affect the volume of the buzzer. If the buzzer has stopped making sound, or is very faint you will want to replace this part: Buzzer, Mini Part # WP694419. Unfortunately, we do not have installation instructions, but it would be a very simple repair. Unplug the unit, and pull it out from the wall. The back metal cover, that covers the back of the control panel would be removed and the buzzer located. You would notate, or take a picture of which wires go where on the switch, remove those wires, remove the switch then reinstall the switch and replace the wires. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Christopher
April 20, 2018
My dryer will tumble but does not heat. I am only getting 120v everywhere in the bulkhead. The heater element, thermostats and fuses are all testing good. How do I check all the parts in the top console? The switches and timers?
For model number 11063022101
Hello Christopher,
Thanks for your question. We have two links below showing the steps for testing the dryer's timer and the switch:
https://www.partselect.com/Dryer+test-timer+repair.htm
https://www.partselect.com/Dryer+test-start-switch+repair.htm
I hope this helps.