We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
October 9, 2017
Will this part fix a leak coming from where the motor goes into the pump housing? Thank you!
For model number RUD3000DB1
Hi Gary,
Thank you for your question. If the leak is coming from this part, then I would say that it probably would fix the issue. I do not see any separately gaskets between it and the motor. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
August 26, 2017
I'm replacing pump housing and I'm wondering how to separate the pump housing from the pump drive motor? I have a new pump housing kit only. Please advise! Thank you
For model number DU810SWKU0
Hi Roger,
Thank you for your inquiry. You will need to uninstall your dishwasher for this repair. You will need to remove the impeller, seals, and screws securing the unit together. Then you will be able to pull them apart. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Darrell
June 19, 2019
Dishwasher wont drain after wash cycle
For model number DU800DWGQ2
Hi Darrell, thank you for your question. If your dishwasher is not draining there are a couple of parts that you may want to check. The first parts to check would be your impeller, you would want to check that for damage. Then you should take a look at the micro switch on your float switch. That can be tested with a multi meter and should be reading 0 ohms. If those parts are fine then you may want to go on to your drain motor being the issue. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Raven
August 14, 2021
I see water coming from where the motor shaft and pump connect , 1st thought was o-ring ,seal , gasket.. . i live on fixed income and can't afford to get the wrong part , doing the repair myself somewhat knowledgeable doing repair of this kind
For model number 6651741590
Hi Raven,
Thank you for your question. If there is water leaking from where the pump and motor shaft connect, the pump and motor assembly will need to be replaced. The part number listed under your model number for the pump and motor assembly is PS11751019. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Does the housing come with a new impeller or propeller. The one i took out is seized
For model number DU811SWPQ0
Hello Dave, Thank you for your inquiry. The impeller is sold separately part# 4386996. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
July 15, 2023
Does this part fit my dishwasher model #DU890SWKU0
For model number DU890SWKU0
Hi William, thank you for contacting us. Yes, the mentioned part is compatible with your model. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Douglas
March 7, 2024
Does the pump housing (Pump Housing Kit WP3369011) for this model fix the most common leaks? I see there is a seal pictured with it. I noticed another seal- (Motor Shaft Seal Head WP3385557). How likely is this the problem with leaking? I would hate to purchase the housing then find that the motor shaft seal was at fault. I think the dishwasher is leaking out of the housing on the opposite end of where the motor shaft goes in, if that gives you an idea of the location. Please email me back with your thoughts and recommendations. Thanks!
For model number DP840DWGX0
Hello Douglas, thank you for contacting us. If the leak is coming from this part, then we would say that you will need to replace the whole pump housing kit, part number PS11741266, to fix the issue. We do not see any separate gaskets between it and the motor. Good luck with your repair!