We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
January 30, 2018
Where can i find instructions/video for reversing the swing of the door? Thanks.
For model number MDE5500AYW
Hello Greg, Thank you for your inquiry. Instructions for reversing the dryer door:1) Remove the hinge hole covers and screws.2) While supporting the door, remove 2 screws in the hinges that secure the hinges to the cabinet.3) Remove door by lifting slightly at the hinges and pulling the hinge tabs out of the hinge slots.4) Move the following parts to the opposite side of the door: 2 hinges and 4 hinge screws, 4 door screws,door strike and screw, inner door cover plate and screw.5) Attach the door to the opposite side of the cabinet using the 2 counter sunk hinge screws. Screw the lower hinge screw in first. This will help to align the door and hinges.6) Replace the hinge hole covers to the opposite side. This information is also available in the user manual for this model. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 23, 2017
I have these hinges for a Maytag dryer but the door doesn’t sit flush when assembled. Does it matter which side they are on. It seems interchangeable but doesn’t nest all the way in when attached.
For model number MDE3000AYW
Hi Kevin,
Thank you for your question. No, it should not matter what side the hinge is on. If you are able to reverse your door then this would be the correct part. Is your door warped at all? Or any of your brackets in that area? Is your appliance level? Sometimes that can effect how the door shuts. I hope that helps. Good luck with your repair.