Make sure you haven't got the discount earlier.
Lock Hoop Door Assembly WP22003269
Rated by 3 customers
Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
- < Prev
- 1
- Next >
I did not use a manual. Just read some tips for removing the latch assy.
Latch Assy:
1. Removed the four screws that hold the lid to the detergent.
... Read more />2. Remove the door and the 2 screws holding the door frame (opposite door hinges).
3. Pull the front panel forward, then remove a screw from each side that holds the washer top lid in place (nut driver).
4 Remove two screws that hold the latch assy (nut driver).
5. Unplug the wiring harness.
6. Reassemble in opposite order.
Lock Hoop Door Assy:
1. Remove the four screws that hold the door together and separate into two pieces.
2. Follow instructions to remove lock hoop (instructions should come with new assy)
3. Reassemble.
-
David from San Juan Capistrano, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
-
ivan from decatur, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Joseph from San Jose, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
- < Prev
- 1
- Next >
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
Manufacturer Part Number: WP22003269
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.