Make sure you haven't got the discount earlier.
Injector Sleeve WP215447
Rated by 18 customers
Really Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Injector Sleeve Specifications
How Buying OEM Parts Can Save You Time and Money
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- Next >
Remove front washer panel screws.
Remove bolts holding front of top to side panels
Remove hose clamp from front hose to injector sleeve.
Twist fill hose ccw 90 degrees at tub fitting to remove.
Clean corrosion at tub attachment po ... Read more int wuth wire brush.
Paint bare metal to seal. Allow to thoroughly dry.
Remove injector sleeve and injector hose.
Trim new injector hose to match length of removed hose (I cut off abt 4 inches)
Install injector hose and plastic sleeve. Ensure clocking is correct on hose.
Install gasket on fill hose fitting.
Insert fitting into tub. Rotate 90 deg CW to latch.
Install gear clamps loosely on fill tube.
Attach fill tube to fill fitting and injector sleeve.
Slide clamps onto tube ends ensuring clamp clocking provides access and clears tub top..
Test tub fill to ensure injector works without leaks
-
Padraic from SAINT PAUL, MN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
-
David from SARASOTA, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
-
Barb from OAK LAWN, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
-
Frank from Patterson, CA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
-
Arnoldo from AUSTIN, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Dennis from scottdale, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
One odd thing - it only leaked when the hot water was entering (if the settings were on cold only no ... Read more leak - no idea why that should be).
Anyway, this injector and the rubber housing it slides into get old and clogged or deteriorate. I ordered all the parts and replace them - but probably only needed to replace the plastic injector nozzel and the rubber sleeve it fits into.
All good now - no more leaks (until the next time!)
-
Forrest from San Diego, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
-
Mark from Park City, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
-
danny from Seymour, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
-
Kenneth from Franklin, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
- < Prev
- 1
- 2
- Next >
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
4 people found this helpful.
3 people found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: WP215447
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.