Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No Water or ice would dispense
Had the problem about 3 years ago the fridge was old and I decided to open it up(remove spill tray, detach 2 screws, remove display panel by popping bottom corners and lifting, disconnect 3 wire plug connections, remove 2 screws holding chute assembly) and take a look I found the problem was with the lever running over the switch and that
... Read more it was worn down not making enough contact to the switch assembly and wrapped some teflon tape around the leverI got 3 years more out of it... this time it was just simply age and needed a new assembly. Again I removed the display panel undid all 3 wire connections along with the water hose. Plugged everything into the new assembly reattached the electronics wires(3) screwed everything back where it was... Done! about 15-20 minutes at most.
Read less
Michael from OLD SAYBROOK, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
March 18, 2020
Does this wp13005701b-chute-assembly-black come with part #21 (the paddle)? Part #21 is listed in the diagram, but i do not see it itemized on the previous page. The plastic "arm" on my paddle broke off, so i believe i only need to replace the paddle part....i'm just not sure whether it is sold separately, or whether i need to purchase the entire assembly. thanks!
For model number AFI2538AES
Hello Steve, thank you for your question. The chute assembly, PartSelect number PS11738673, includes the paddle. This paddle is no longer sold separately, and is only sold as a part of the assembly. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Nick
January 29, 2018
Does this assembly include all related electronics? Specifically the led circuit board?
For model number Af12538aeb
Hello Nick, thank you for your question. The Chute Assembly does not come with the LED circuit board. The circuit board part number is 67006294. Unfortunately, this part has been discontinued by the manufacturer. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
February 24, 2023
Does this assembly include the lights for the ice and water dispenser?
For model number MFI2568AES
Hello Barbara, thank you for your question. The Chute Assembly PS11738673does not come with the LED circuit board. The correct LED Control Board is part PS12349472. We look forward to hearing from you.