We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cheri
May 6, 2018
I broke the housing for my water filter, by twisting the old filter to remove it. Now, the new filter and by-pass plug both fall out. Is this the part i need, and if so, how can i install it?
For model number GYE22KMHGES
Hi Cheri,
Thank you for your question. This is actually just the cover for your water filter. I have listed the part that you are looking for down below. I hope that helps. Good luck with your repair.
The filters water filters I ordered (3), RPWFE did not fit my refrigerator. The filter matched the old filter except for the nozzle configuration on the end that insert into the water supply opening. I tried to insert the filter, but I couldn’t get it to fit. As a result, it damaged the filter housing where the filter connects to the water supply. Now I need new filters and a new water supply housing. How do I do that and not get changed for the new replacement filters and the water supply housing?
For model number PFE28RSHHSS
Hello William, thank you for your inquiry. According to our research, the water filter, part number PS10063209, and water filter housing, part number PS11736926, are compatible with your model. The instructions for replacing the water filter are as follows:
1. Remove the old cartridge by opening the filter door and pulling on the bottom of the cartridge to allow it to swing outward. When the cartridge can no longer swing, gently pull it to unseat it from the cartridge holder. Do not twist the cartridge.
2. Align the top of the filter cartridge with the cartridge holder with the word "FRONT" facing outward, then push the cartridge towards the rear of the unit until it is fully seated.
3. While continuing to ensure the cartridge is fully seated in the holder, gently swing the filter inward until it is in position. If the filter will not swing easily, check to ensure the filter is properly aligned and fully seated within the cartridge holder. Close the filter door.
4. Run two gallons of water through the cold water dispenser (about 5 minutes) to remove air from the system. A newly installed filter cartridge will cause water to spurt from the dispenser. Use a large pitcher or sports bottle to catch the water spray.
We hope this sorts out your problem!
When the water filter is pulled out water just shoots everything what part should be replaced to repair that?
For model number PYE22KSKLSS
Hi Brian, thank you for the question. Based on the description that you have provided, we would recommend replacing the water filter manifold, part number PS6447739, to fix the issue. It holds the water filter and connects the water lines to the water filter. We hope this solves your problem!