Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mike D - August 3, 2021
Verified Purchase
Exact replacement and very fast shipping
The control panel was an exact replacement and was delivered quickly, very happy and it is back in working order. Thank you!
★★★★★
★★★★★
Harry S - December 24, 2020
Verified Purchase
Great part and to fix was simple
My appliance is in working just fine and time wasn't a long wait Just had to wash dishes for week Thanks will contact them if needed again.
★★★★★
★★★★★
Steve S - October 7, 2020
Verified Purchase
Maytag control panel
As expected!
★★★★★
★★★★★
Louis M - April 25, 2019
Verified Purchase
Working dune
Brand new part was an exact fit
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
December 24, 2017
What is the difference between control panel 1 and control panel 1a?
For model number MDBH979AWS3
Hi Greg,
Thank you for your question. This part is black while part 1a is white. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jorge
February 21, 2018
The panel control comes exactly with what parts? It is the top of the door of the dishwasher, but it comes with all the controls and the box that is inside? T he box where all the cables go to the main body of the dishwasher? Basically is just like take the old one and put the new one and that's it? Thank you.
For model number MDB7609AWW2
Hello Jorge, thank you for your question. The panel control is the whole control/touch panel where all the different cycles are displayed, and you push the buttons to make your selection. It also includes the ribbon connector cable that plugs into the control board. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vern
March 12, 2018
My dishwasher won't start so i replaced the bi-metal fuse,that wasn't it.When i put control panel back on all lights lit up like a christmas tree and i can't turn them off.Do you have any thoughts on what it might be and how to fix.Thank you vern
For model number mdbh979aw3b
Hello Vern, thank you for your question. It sounds like the issue is with the electronic control board. I would recommend replacing part number CNTRL-ELEC W11202746. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sally
April 8, 2018
Does this control panel come in stainless? I am thinking of replacing the door panel & control panel with the stainless since my kitchen is stainless and my dishwasher is working perfectly.
For model number MDBH979AWB3
Hi Sally,
Thank you for your question. No, this panel only comes in Black and White. For a Stainless model you would need this panel, the black one. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Kathleen
July 9, 2019
I need instructions to install I can not get inserts out.
For model number MD8H979AWS3
Hello Kathleen, Thank you for the question. You generally have to remove the gasket around your dishwasher door to reveal the screws that hold the back side of your door in place. Remove those screws. Remove the back side of your door. Remove any screws holding in the control panel. Put in your new control panel, reattach the parts and reverse the process to put your door back together. I hope this helps!
Was this helpful?
Thank you for voting!
Linda
July 29, 2019
All lights are working, however, pushing the soft, start button, will not start the cycle. Is this just the plastic panel or is there some electrical element? I am confused between this and the cnrl elec part.
For model number MDBH979AWB3
Hi Linda, thank you for your question. It could either be the Control Panel or the Electronic control board (which I have linked below for you). Unfortunately only a technician would be able to test these parts to tell you which one might be causing the issue. I hope that helps. Good luck with your repair.
Hello,
I have this model of dishwasher. Most lights on the control panel can still be turned on and off except for normal cycle light. The reset button still works and is interrupted when i open the door. However, it is impossible to start the washing cycle by pressing start. Do you know which piece is involved?
For model number MDB7609AWS2
Hello David, Thank you for the question. You may need to remove the control panel to check for any visible damage.If the panel is good normally the control board will need to be replaced. PartSelect Number PS12349161. Hope this helps!
No power on panel, but power is going to the box. I disconnect and reconnected and still no power. The latch is broken ,so I removed pannel to test and still no power. If I replace control panel does 8t c9me with latch as well.
For model number MDB7609AWS1
Hi Jason, thank you for your question. According to our research, a damaged or faulty bi-metal fuse, part number PS2360984, could be the reason your dishwasher has no power. Check the bi-metal fuse with a multi-meter for continuity. If the bi-metal fuse works, then you will need to replace the control board, part number PS12349161. The control board does not include the door latch. The door latch, part number PS11754317, can be ordered separately. Please submit a new question if you have any follow-ups.
Can i purchase the plastic control panel, less all the components. I only need the panel itself. The handle fell off due to the plastic stud that the handle fastens to broken. Per the drawing on the internet it looks like i would have to
For model number MDBH979AWB3
Hello Alan, Thank you for your inquiry. You can only get the control panel as an assembly with the overlay and insert. Hope this helps!
Was this helpful?
Thank you for voting!
Peter
August 2, 2017
How hard is it to replace touch pad on a Maytag dishwasher? Is it a dys item if you are handy and a know it all
For model number Maytag MDBH979AWS3
Hi Peter,
Thank you for the inquiry. You would actually have to replace your whole control panel as the touch pad does not come separately from that plastic housing it is attached to. It is generally a pretty easy installation. You generally have to remove the gasket around your dishwasher door to reveal the screws that hold the back side of your door in place. Remove those screws. Remove the back side of your door. Remove any screws holding in the control panel. Put in your new control panel, reattach the parts and reverse the process to put your door back together.
I hope this helps!