This drain pump is a genuine OEM replacement part that is specially made for various models of dishwasher. It is responsible for removing water from the dishwasher at the end of a cycle. It pumps the water out through the drain hose, which is connected to the kitchen sink plumbing or a dedicated drain line. If you notice an unpleasant odor and water pooling at the bottom of your dishwasher after a cycle, it could indicate a problem with the drain pump. If the pump is faulty you may also hear unusual rattling and grinding sounds.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining | Noisy
This part works with the following products:
Dishwasher.
This part works with the following products:
Bosch, Thermador.
Part# 00631200 replaces these:
AP5972147, 631200
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark A - April 22, 2023
Verified Purchase
Pump works well. Fast shipping.
Pump is easy to install. Working great.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
July 9, 2019
Hello. The housing on my sump of my Bosch dishwasher leaks. When I look at it, it appears warped and will not make a seal at the o ring where it attaches to the bottom of the tub, allowing water to leak and causing repeated e:15 errors. I cannot find the part on your website
For model number SPE53U55UC
Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10061173 for the sump. Hope this helps!
I have a Bosch dishwasher that is noisy in the bottom right corner during the wash cycle. Your site recommends replacing the pump.
My question is does the pump function during the wash cycle then drains the water or are they two separate pumps?
For model number Shpm98w75n
Hello Tom, thank you for writing. There are two pumps. The pump that was recommended is the Drain Pump PartSelect Number PS11704799. The other is Circulation Pump with Heater PartSelect Number PS11724988. Circulation pump with heater moves heated water through the spray arm to clean the dishes. Good luck with your repair.
Hello, I’m getting a code e24 on my Bosch dishwasher. My drain and line is free and clear but water is staying in the dishwasher. Is this the pump responsible for draining the system?
For model number SHE53T52UC/E7
Hi Alexander, thank you for contacting us. The error code E24 is a drain error code, although it can be triggered by a circulation pump or main control issue. The first thing to check is your drainage system, make sure the filters are not plugged in and the check valve is in place. Your check valve is located at the bottom of your tub on the side wall, which is generally white in color. If those two things are looking good, check your drain hose. Is it kinked or clogged? (Did you just replace your garbage disposal? If you answered yes, remove the plastic plug that comes with the new disposal.) The next thing to check is your drain pump. When you press cancel, can you hear a humming noise? If not, you will need to check for power to the drain pump, there should be 120 volts. If all the items in your drain system test OK but you are still getting the code, the next step will require you to remove the dishwasher from the cabinet. After the dishwasher has been removed from the cabinet, you will need to get to the main control on the lower right side. Make sure the breaker is turned off for the dishwasher at this time. Remove the connector with the three grey and three black wires. You are looking for 89 ohms on the grey wires going to the drain pump, and 14 ohms across the black wires going to the circulation pump, part number PS11724988. If both check out, you will need to replace the main control, part number PS8737008. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Hi, The dishwasher is not completing the wash cycle. We typically use the sanitary wash, so it's about 2.5 hours. In the morning, the red light is flashing, open the door and there's hot water and steam. The time left is 59 to 45 min remaining and flashing as well. We'll press start again, the light stops flashing, close the door, runs for another 15 minutes, then same thing. We finally reset the cycle and set to auto drain (hold start for 3 seconds until 0:01 shows). Close door again. Sometimes it drains, other times, it doesn't. I've checked the drain line for kinks and blockage, clean the filter strainer daily, check and clear the vacuum breaker. I've also blown compressed air back though the sink vacuum breaker, and the water in the dishwasher comes up like a bubbling crude. No error code. Any idea's? Thanks in advance for your help!
For model number shp865wd5n-11
Hi Seth,
Thank you for your question. If your dishwasher stops mid-cycle, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock and switches, the electronic control board, the control panel and the circulation pump assembly with heater. We have included a link that you may reference on how to check these parts. We hope this helps! Good luck with the repair!
WILL DRAIN PUMP
WILL DRAIN PUMP PS11704799 fit THIS MODEL?
For model number SHS863WD5N/13
Hi Susan,
Thank you for your question. The part number listed under your model number for the drain pump is PS11704799. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!