Make sure you haven't got the discount earlier.
Circulation Pump and Motor Assembly W10782773
Rated by 13 customers
Easy
1- 2 hours
Ratings submitted by customers like you who bought this part.
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Circulation Pump and Motor Assembly Specifications
How Buying OEM Parts Can Save You Time and Money
Replacing your Kenmore Dishwasher Circulation Pump and Motor Assembly
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- Next >
I found the Partselect website to be very easy to navigate and very happy that it had parts for my dishwasher model along with tro ... Read more ubleshooting tips, reviews and installation videos.
I started with replacing the door gasket as it seemed quite compressed and missing part of one end. The part came quickly in just 2 days. It was an easy installation. Unfortunately, it did not fix the leak.
Next step was to turn on the dishwasher and slide my cell phone further underneath with the video on to try and catch the culprit. Water was dripping off several points but it appeared that the leak was from two or three places around the main tub bottom gasket. That gasket is not available as a separate part. so I had to order the whole pump and motor assembly. Again, the part came in two days.
This part was a bit more challenging to replace. The installation video was very helpful. I removed the old part easily. I thoroughly cleaned the gasket seat area and added a layer of silicon grease. While rubbing on the grease, I found a few corrosion pinholes in the bottom of the stainless steel gasket seat. I did not feel that they were significant enough to worry about since the new gasket should easily seal them. I turned out to be right. The biggest challenge was reinstalling the motor assembly clips. They were very tight but I eventually got them all in with the help of a small mallet.
Once reassembled, I tested the new motor assembly by just pouring water into the bottom of the dishwasher, and not turning it on. There was still a small leak further to the back of the motor assembly. Using my phone's video, I could see that the tub gasket was no longer leaking, but the Thermistor sensor was.
I could easily remove the sensor by twisting and pulling it off. The sensor was in good shape. I figured that it must be the o-ring around the sensor casuing the leak as it appeared somewhat compressed. Unfortunately, the o-ring is not sold separately from Partselect. Therefore, I took the sensor and o-ring to the local hardware store where I was able to identify a replacement o-ring for one dollar.
I reinstalled the sensor with the new o-ring and water tested again the dishwasher. No more leaks!
I ran a wash cycle and still no leaks! We have now ran several dozen cycles without any leaks. All is good! It appears that I definitely had leaks around the the main tub bottom gasket as well as the Thermistor sensor. After eighteen years of use, I feel it was still a good idea to replace the door gasket even though I could not fully verify that it was a problem.
We are now able to keep our dishwasher (hopefully for many more years) and saved significantly by doing it myself.
-
Jim from Alpine, UT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
. Disconnected interior components
Pulled machine out/laid on side
Disconnected - hose/electricals/drain pump
Removed clips
Popped ... Read more out circulation pump/motor assembly
Installed new circulation/pump assembly/clips
Reconnected - hose/electricals/drain pump/interior components
Reconnected electrical/water connection
-
Joseph from EAST HADDAM, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
-
Tim from MADISON, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
-
shawn from OLYMPIA, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
-
Michael from COVENTRY, RI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
-
Steven from EL SOBRANTE, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Socket set
-
William from GEORGETOWN, TX
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
-
Dana from HILLIARD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
-
Loren from WILMINGTON, NC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
-
Patrick from Oak Grove, MN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
- < Prev
- 1
- 2
- Next >
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
8 people found this helpful.
2 people found this helpful.
1 person found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: W10782773
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.