This ice cutting grid is located behind the ice maker door. The cutting grid consists of thin, heated metal wires that slice the slabs of ice when they slide off the evaporator plate, creating the cubes that fall into the ice bin. When the cutting grid is broken or malfunctioning, the slabs of ice could stack, and the ice production cycle stops. Replace your existing cutting grid with this OEM replacement part when you discover that the part is not working properly. Remember to ensure that the power is disconnected from your refrigerator before you begin this repair.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marshall Y - March 3, 2018
Verified Purchase
Worked, but would have been cheaper if just the bezel and wire were acailable instead of the entire grid assembly.
The repair went as expected, but cost a great deal more than necessary if component parts were available instead of the entire assembly.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Failure to make ice
Unit was failing to make ice as a result of cutting grid fail (broken cutting wire disrupted circuit so no heating) and corresponding ice build up on cooling plate. Defective cutting grid swapped out - replacement part had superior design to OEM and was made of comparable to superior materials. Very satisfied.
James from Baltimore, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
January 1, 2018
If the cutting wire is broken on the grid, is it possible to just replace the wire and not the entire grid assembly? Thank you!
For model number ZDIS150WSSA
Hi Kevin, Thank you for the question. Very sorry but the individual wires are not sold separate from the grid. The full grid will need to be replaced. Good luck with the repair!