This part will drain water from the appliance in different cycles.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD26X10025 replaces these:
AP3884371, 1168314
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John S - April 24, 2020
Verified Purchase
Dishwasher drain pump
Part fit and worked perfectly
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was not draining, water left in tub
The repair was very easy and went smoothly. Here's an overview of the steps I followed: I used a shop vac to remove as much water as possible from the dishwasher tub. I turned off the water supply to the dishwasher and then removed two screws that connect the dishwasher unit to the cabinet/counter top. I also removed two screws at the bot
... Read moretom of the dishwasher to remove the dishwasher's kickplate. After that I pulled the dishwasher out and uplugged the unit then tipped it on it's side to gain access to the pump assembly (it's at the bottom of the unit). The drain pump assembly was held in place by two screws and a metal band that connects the pump to the rubber/plastic drain area. Also there are two wire leads needed to be unplugged. I took a picture of the unit before removing anything so I could have a record of what it all looked like assembled. Then I took off the old pump and put on the new and put it all back together. Turned the water back on and ran a quick rinse and spin cycle and all was well! Dishwasher drained properly and there were no leaks. Easy and I saved a bit of money doing it myself.
Read less
Steven from Lompoc, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
73 of 77 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was not draining
We pulled the dishwasher out completely, drained water that was in the dishwasher. Tilted the dishwasher and the part we needed to replace (Pump Drain Assembly) was in clear view. We used a screwdriver to take out a few screws and replaced the Pump Drain Assembly with the new one. Put the dishwasher back in and proceeded to wash dishes
... Read morein the now fixed dishwasher. The part was very easy to change out.
Read less
KATHY from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
35 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
January 9, 2018
What are causes for not draining
For model number PDW7800J10BB
Hello Roger, Thank you for your inquiry. The drain hoses could be clogged or cracked, the drain pump may not be working properly, the drain/check valve flapper could be broken, the sump filter could be clogged, or the impeller and seals could be cracked. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 28, 2018
Has not completely drained tub, and will not start to fill if you recycle it.
For model number Gld4400n10bb
Hello Mark, thank you for your question. I would recommend checking the Check Valve Flapper
for any cracks and damage and make sure it's not stuck closed. Make sure there are no clogs or cracks in the drain hoses. You can also test the pump with a multimeter to see if it has continuity. A normal pump should read about 200 ohms when you are testing it. If the unit will not fill with water, you should check the Water Inlet Valve Part Number: WD15X10003. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Maria
July 29, 2019
My dishwasher stopped spraying water from above, so it does not wash. What part can be defective?
For model number GHDA485N10CS
Hi Maria,
Thank you for your question. If the top sprayer is not spraying water, it may be clogged. You will need to inspect the part to see if there is any debris in it. I hope this helps. Thank you and have a great day!