This halogen lamp assembly in your oven illuminates the cavity and is often located near the back wall or on the ceiling, so that you can easily monitor the cooking progress of your food. It consists of a bulb and a protective cover. To check if it is broken, look for a burned-out or broken bulb, a cracked or missing cover, or loose connections. If the bulb does not light up despite being functional, there may be an issue with the assembly. Not replacing a damaged assembly can make it difficult to check your food or identify heating or spillage issues, so prompt replacement is essential. To remove your lamp assembly, first turn off the oven and allow it to cool down to avoid burns or electrical shock. If there is a separate power switch for the lamp assembly, turn it off. Alternatively, switch off the power at the circuit breaker for complete safety. Consult your user guide to find the wire connection point for the lamp assembly. You may need to remove a small cover or access panel to access it. Carefully unplug or detach the wire from the oven. Once the wire is disconnected, you can remove the entire lamp assembly from its mounting location. This OEM replacement part comes with a covered bulb and a wire connector.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Electrolux, Frigidaire, Kenmore.
Part# 139001800 replaces these:
AP5954459, 318241006, 7318241006
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not spin.
Remove two screws in back to release the top. Lift the top from the back and pull backwards to remove. Open washer door and unscrew two screws to release the switch. Reach down inside from the front and remove the switch. Unplug the switch and replace with the new one. Reverse the process to install. I found it ea
... Read moresier to have someone hold the switch while I screwed it back in.
Read less
John J from UPTON, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GLEN
September 17, 2019
Hi - one of the the protective glass covers on the interior lights has broken and I need a replacement. Is it available? Thanks!
For model number EW30ES6CGS4
Hello Glen, Thank you for the question. Very sorry but the glass lens is only sold as part of the Lamp Assembly. Hope this helps!
Was this helpful?
Thank you for voting!
Lynne
January 10, 2023
Why on earth does it cost $89.00 to buy an oven light kit just to replace the lightbulb??? Why can't I buy just the lightbulb?????? Talk about gouging customers!!
For model number EW27EW65GS6
Hello Lynne, Thank you for your inquiry. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the parts. We try to keep our prices as low as possible but do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind the prices. Also we are only able to sell the parts as they come from the manufacturer, and for the model number that you have provided, the light bulb is only available as part of the lamp assembly. Good luck with your repair.