Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your wa...
$4.39
In Stock
Order within the next 59 mins and your part ships today!
This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appliance, uncontrollabl...
$11.09
In Stock
Order within the next 59 mins and your part ships today!
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$47.80
In Stock
Order within the next 59 mins and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.33
In Stock
Order within the next 59 mins and your part ships today!
This suspension rod kit is a genuine OEM kit specially designed for washing machines. Each kit includes a set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods are responsible for supp...
$76.15
In Stock
Order within the next 59 mins and your part ships today!
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
$6.87
In Stock
Order within the next 59 mins and your part ships today!
Order within the next 59 mins and your part ships today!
Questions And Answers for WTW4800XQ4
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
16 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
January 29, 2020
Tub bangs against the sides of the machine when rinsing. I need 4 new shock absorbers
For model number WTW4800XQ4
Hello Samuel, thank you for your question. The suspension rod kit for this unit is PartSelect Number: PS11703290. Please enter the part number into the site for current price and availability. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
November 28, 2019
Washing machine makes a ratcheting noise during wash and rinse. Occasionally doesn’t spin out the clothes after rinse but if I put it on drain and rinse cycle, it will spin out clothes. Machine is 7 years old. Worth fixing?
For model number WTW4800XQ4
Hello Donna, Thank you for the question. I suggest checking the Shift Actuator, PartSelect Number PS11747977. Actuator shifts the splutch and monitors the position of the splutch. Hope this helps!
Hello Franklin, We are glad you asked! There are four, The Suspension Rod Kit is PS11703290. We have a video of how to replace it on our site. We hope to hear from you soon.
Water drains but machine doesn't spin and just stops.
For model number WTW4800XQ4
Hello Clark, thank you for your question. A broken drive belt, or one that has slipped off the pulley wheel, can cause the washer not to spin. To determine if this is the case, remove the back of the washer and visually check to see if the belt is still on the pulley. If not, you may need to replace the drive belt. Part number PS11747978. It could also be your lid latch. Part number PS3497627. To test the lid switch, first unplug the washer, then unscrew and lift the top. You'll find a plastic connector with three wires near the center of the exposed area. This is the connector to the lid switch; you can use it to check the switch operation if you have a multimeter. Disconnect the connector, Now select the lowest 'Ohms' setting, put the probes of your multimeter on the outer two connector terminals from above, taking care to contact the metal inside the connector body. With the probes in this position, the meter will indicate continuity when you are not pressing the switch down, and show an open circuit when you let it up again. If it does not do this, then the switch has failed. We hope this helps!
When I got home, my lid was locked. When I cancelled the load to open the lid, the washer was full of water. The only light I can get on is the sensing light as solid green. I cannot get the washer to start in any mode and it will not drain. What should I do?
For model number WTW4800XQ4
Hi Collin, thank you for your question. According to our research, the issue is probably with the control board, part number PS4704633. But before replacing the control board, we would recommend checking the following parts: lid latch assembly, part number PS3497627, shift actuator, part number PS11747977, drive motor, part number PS11757089, and drain pump, part number PS11751719. We have attached a relevant link to help you check these parts. We hope this solves your problem!
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs. Slip the new cogs into the underside of the cup, and slide the cup back down in the a
... Read moregitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out). Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer faile
... Read mored which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of o
... Read moreld cogs remove and replace with new, reassemble
