This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
$8.87
In Stock
Order within the next 12 hrs and your part ships today!
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
$35.41
In Stock
Order within the next 12 hrs and your part ships today!
This turntable ring in your microwave makes sure that your glass tray rotates smoothly. Located just above the internal floor, it supports the tray so that your food cooks evenly. A broken turntable r...
$39.24
In Stock
Order within the next 12 hrs and your part ships today!
This mounting plate is sourced directly from the original manufacturer for use with microwaves. It is a metal plate designed to support a microwave by attaching the microwave to the wall studs. If the...
$15.83
In Stock
Order within the next 12 hrs and your part ships today!
This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microwave produces no heat...
$29.50
In Stock
Order within the next 12 hrs and your part ships today!
If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an ...
$24.71
In Stock
Order within the next 12 hrs and your part ships today!
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$11.13
In Stock
Order within the next 12 hrs and your part ships today!
This damper is an authentic OEM replacement assembly used in microwave/range hood combos. It includes the damper door and frame. It is designed to direct the flow of air through the vent duct, and the...
$73.03
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for WMH32519HZ5
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cole
March 15, 2022
I was changing out a burned-out light bulb on the bottom of the unit. When i unscrewed it, the glass separated from the base and it shorted out. It tripped the circuit breaker in the electrical panel. Once i replaced the bulb and turned the breaker back on, the button on the control panel no longer would turn the cook top light on the bottom of the unit on. Reasonably sure there's a relay or module that was toasted inside the unit. Needing to identify the part needing replacement.
For model number WMH32519HZ5
Hi Cole,
Thank you for your question. If you are unable to turn the light on, then you will need to replace the electronic control board. The part number listed under your model number for the electronic control board is PS12717457. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hi William, thank you for reaching out. Here are some general instructions that will help you replace the control panel: Unplug the microwave and open the door. Remove the screw on the top of the panel. Push the control panel a little bit upward, the panel will snap out. Remove the ground wire screw first and then remove other wire harnesses. Then, remove 4 screws on the control board and remove the wire harness. Then, replace the control panel. It is an easy replacement. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 18, 2022
When front door is shut closed, the clock display board gets all distorted and unable to do function performed..
For model number WMH32519HZ5
Hello Robert, thank you for reaching out. It seems like the control panel is defective and needs to be replaced. The part number for the control panel is PS12348688. If this does not help, we suggest that you check the electronic control board, part number PS12717457. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
What is the part number for the filter that goes in the top of the unit?
For model number WMH32519HZ5
Hi Sherri, thank you for asking. The charcoal filter, part number PS11769323, is the part you are looking for. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read moreght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
This was an over-the-range microwave/hood, so the replacement parts were significantly cheaper than buying a new unit.
Take microwave down (really a two-person job). Remove microwave cover (about 20 philips screws), discharge HV capacitor by shorting terminals to microwave case. Take photos before pulling anything apart. R
... Read moreemove plastic ducting covering part of the magnetron (3 philips screws). Remove old magnetron (4 Torx screws), need to disconnect small thermostat on side (2 philips screws) and replace with new magnetron. Replace HV diode (screw on one end, other end simply plugged into capacitor terminal). Put everything back together and it works fine.
