This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrig...
$10.64
In Stock
Order within the next 12 hrs and your part ships today!
This is a door shelf that is designed for use within Samsung refrigerators. This shelf measures 16.5 inches wide, 4 inches high, and 6.5 inches deep, and is made of white and clear plastic. If your cu...
$75.26
In Stock
Order within the next 12 hrs and your part ships today!
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gal...
$124.92
In Stock
Order within the next 12 hrs and your part ships today!
This Samsung hex screw is a genuine OEM replacement fastener that is designed for the refrigerator door handle. It is a stainless steel screw that secures the handle to the refrigerator door. It is re...
$10.64
In Stock
Order within the next 12 hrs and your part ships today!
This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it fr...
$66.88
In Stock
Order within the next 12 hrs and your part ships today!
Unplug refrigerator Turn off water supply to ice maker. Unscrew plastic top cover. Unplug all of the electronic connectors Ooen both doors and remove the base plate 3 screws Disconnect the 2 water lines. Have a container to catch the water. Instructions on how to disconnect are on
... Read more a tag locates in in of the water lines Unscrew the 3 bolts holding the top door hinge and the ground wire Remove the door by lifting up . The water hoses will lift out of the broken base hinge. Remove the broken hinge by pulling straight up. It slides out. Slide the new hinge in. Remount the door by inserting the hoses through the hinge hole. 2 people is helpful. Attach the top door hinge, reconnect the water lines, base cover and Reconnect electronics wires and cover. Good to go
Unplug the refrigerator and turn off the water supply Remove the screws from the freezer top hinge cover and remove it Disconnect all the plugs and the grounding screw that were present under the cover Remove the front bottom grill (under the doors) 3 screws Place the drip pan under the waterline connectors On the
... Read more freezer side of the connector push the lock into the connector and pull the hoses straight out of the connector Remove the bolts from the top freezer hinge and lift it off Lift the whole freezer door straight up off of the bottom hinge and lay it on a flat surface. Remove the screws from the hinge piece on the bottom of the door and slide it out. Line the new hinge piece up and slide it into place and reinsert the screws. Remove the cam screw from the hinge bottom (still attached to the refrigerator) and remove the can pieces Place the new cam on the hinge bottom and reinstall the screw. The flat side of the cam goes down. Lift the freezer door back into place by lining up the bottom hinge pieces Slide the top hinge back into the freezer top and reinstall the bolts Reinstall the hoses into the connectors on the refrigerator bottom by pushing them in Plug all the connectors together on the freezer top and reinstall the grounding screw Space out the connectors so they will fit under the cover and put the top cover back on. Plug the refrigerator back in and turn on the water supply. Test the water and ice maker then check the bottom connectors for leaks Reinstall the bottom grill and congratulate yourself on a job well done
