This fan motor is compatible with most frost-free Samsung refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the ...
This is a refrigerator ice dispenser lever. It is clear and made entirely out of plastic. The function of the ice dispenser lever is to dispense ice when the lever is pushed. If the lever is cracked o...
Order within the next 11 hrs and your part ships today!
Questions And Answers for RS2630SH
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
January 11, 2020
When i open either door, the frame between the doors is extremely hot. How do i fix it
For model number RS2630SH
Hello Robert, Thank you for your questions. The par you will need is PS4140438, bi metal thermal protector. Have a great day.
Was this helpful?
Thank you for voting!
Millie
November 5, 2021
Bottom self ice building and leaking sometimes
For model number RS2630SH
Hello Millie, Thank you for your inquiry. We have researched the model number you have provided and recommend the following parts to fix your issue: defrost thermostat, evaporator fan motor, the water inlet valve, and the defrost heater. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good Luck with your repair.
Unplugged Unit Removed back cover removed fan assembly removed fan balde opened motor case replaced motor sealed the motor case fastened to fan shroud re installed fan blade re attacehd to frig- Carefull of the coolant lines Plugged in motor assembly Replaced back cover Re Plugge
... Read mored in Frig to AC outlet.
unplugged first, then Pulled out frig and took out fan motor. plugged in to be sure it worked. waited few minutes and it started running. then placed everything back where it belonged. Talked to appliance store and told me what the problem was but it would take longer for them to get then for me to order on line. Best way to get it do
... Read morene... No directions on box...
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out.
... Read more Secondary note * be mindful during reassembly to not put pressure on the water dispenser or have a glass handy. :)