Models > RF26VABWP

RF26VABWP ((XAA-0000)) Samsung Refrigerator - Overview

Sections of the RF26VABWP

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Ice Maker Assembly Kit – Part Number: DA97-05422A
Ice Maker Assembly Kit
★★★★★
★★★★★
(1)
PartSelect #: PS4173396
Manufacturer #: DA97-05422A
The ice maker assembly in your refrigerator connects to the water source and is responsible for producing ice. If your ice maker is damaged, leaking, or not producing enough ice, you should consider r...
$260.74
  In Stock
Order within the next 11 hrs and your part ships today!
Evaporator Cover Assembly – Part Number: DA97-06198E
Evaporator Cover Assembly
PartSelect #: PS4174011
Manufacturer #: DA97-06198E
$283.47
  On Order
Dryer Guide Box – Part Number: DA61-03416A
Dryer Guide Box
PartSelect #: PS4144031
Manufacturer #: DA61-03416A
$44.46
  Special Order
GROMMET-TRAY DRAWER BOX; – Part Number: DA63-04313A
GROMMET-TRAY DRAWER BOX;
PartSelect #: PS4150633
Manufacturer #: DA63-04313A
$5.34
  Special Order

Questions And Answers for RF26VABWP

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker stopped making ice and made a repeating clicking sound
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in reverse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
Parts Used:
Ice Maker Assembly Kit
  • Robert from AKRON, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice. Making ice slowly. Clicking sound when making ice.
(1) Set ice production to OFF from the front panel of the refridgerator. (2) Inside the fridge, remove the screw holding the panel covering the cable for the ice naker assembly. (3) Remove the panel. (4) Disconnect the power cable of ice maker. (5) Holding the assembly with one hand, release the locking clip of assembly housing, and slide assembly forward until it is free. (6) Remove the ice maker assembly. (7) Install the new assembly by reversing the previous steps. (8) Reset the ice maker by pressing the reset button and holding it for at least 8 seconds. The first time the ice maker is primed with water, there are 2 chimes. (1 High , 1 Low).
Parts Used:
Ice Maker Assembly Kit
  • Gregory from North Richland Hills, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!