This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$17.22
In Stock
Order within the next 9 hrs and your part ships today!
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
$28.02
In Stock
Order within the next 9 hrs and your part ships today!
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
$34.76
In Stock
Order within the next 9 hrs and your part ships today!
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
$36.65
In Stock
Order within the next 9 hrs and your part ships today!
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
$23.56
In Stock
Order within the next 9 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.45
In Stock
Order within the next 9 hrs and your part ships today!
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
In Stock
Order within the next 9 hrs and your part ships today!
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$43.14
In Stock
Order within the next 9 hrs and your part ships today!
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is...
$18.41
In Stock
Order within the next 9 hrs and your part ships today!
Questions And Answers for NED4500VQ0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
October 7, 2022
Dryer dose not heat what do I have to replace?
For model number NED4500VQ0
Hello Carol, thank you for your question. We have researched your model and found that the culprits of this issue can be multiple. The most probable culprit is the thermal cut-off kit, part number PS334299. If that does not take care of the issue, then the problem is most likely to be related to the dryer cycling thermostat, part number PS11741405. If you require assistance placing an order, please contact customer service. We hope that helps!
Do you guys sell the metal connectors for the two wires that attach to thermal fuse?
For model number NED4500VQ0
Hi Sienna, thank you for reaching out. We have researched and found that the connectors are not sold individually and you may need to order the thermal cut-off kit, part number PS334299, for the required parts. We hope this information is useful!
What screw thread are the screws that That Connect the power cord to the dryer 279393
For model number NED4500VQ0
Hi William, thank you for the great question. According to our research, the screws that connect the power cord of your model have right-hand thread direction. We hope this information is useful!
Was this helpful?
Thank you for voting!
David
December 20, 2023
Dryer will not heat. What should we be looking at?.We have already replaced Dryer High limit Thermostat and Dryer Cycle Thermostat. Please call or contact ASAP. Thank you
For model number NED4500VQ0
Hi David, thank you for contacting us. Since you have already replaced some of the most common parts that may cause this issue, we would recommend checking the heating element, part number PS334313. We hope this helps.
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back
... Read more off.
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open an
... Read mored when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
